Table of Contents
Advertisement
Manual Operation
Compatibility
The HP 8360 series synthesized sweepers are designed to be, in all
but very few cases, a complete feature superset of the HP 8340/8341
synthesized sweepers. The most notable omissions are that the
HP 8360 series does not accept:
line triggers (ie 50 or 60 Hz line frequency)
n
an external leveling input from positive diode detectors
n
Front Panel Operation
The HP 8360 series uses a softkey menu driven approach toward
accessing instrument functions versus a front panel key or shift key
sequence as with the HP 8340/8341.
Instrument Preset Conditions. The factory defined preset conditions
for the HP 8360 series are identical to those for the HP 8340/8341.
The HP 8360 series also allows you to define a different set of preset
conditions. Refer to "Changing the Preset Parameters," in Chapter 1
for examples and more information. Table 3-6 illustrates the factory
instrument preset conditions for the HP 8360 series and the HP
sets the following:
Instrument Preset Conditions for the HP 6360/8340/8341
Function
Sweep Mode
Sweep
Trigger
Markers
Modulation
Status Bytes
Leveling
RF Output
Power Level
Power Step Size
Power Sweep/Slope
Storage Registers
HP-IB Address
Status Byte Mask
Extended Status Byte Mask Unchanged
Language Mode
Table 3-6.
Condition
Full Span
Continuous/Auto
Free Run
All Off
Off
10% of span
Cleared
Internal
On
0 dBm
10 dB
0 dB
Retain current values
Retains current value
Unchanged
Unchanged
Specifications
Advertisement
Chapters
Table of Contents
