Chapter 4: Optional Display/User Interface; Installation; Removing The Display - GE DewPro MMY31 Installation And Operation Manual

General eastern trace moisture transmitter

Hide thumbs Also See for DewPro MMY31:

Table of Contents

Optional Display/User Interface

If the DewPro is equipped with an optional display/user interface,

follow the procedure below to access the buttons.

Figure 4-1: Dewpro with Display

1. Unscrew and remove the protective windowed lid from the

DewPro (as shown in Figure 4-1 above), exposing the display

module below. The buttons V, H, + and – are now accessible.

2. The display unit snaps onto the printed circuit board, resting on

four posts. When removing the display, push one post to the

outside, using a small screwdriver, and pull the display out.

3. Then unplug the display cable.

September 2005

4-1

Table of Contents

Show Quick Links

Table of Contents