Saving To An Expansion Memory Card - Sanyo VSP-SV2000P Instruction Manual

Sanyo vsp-sv2000p network video server instruction manual
Table of Contents

Advertisement

Alarm Settings
Saving to an Expansion Memory
Card
If you would like to save and play back several
sets of alarm data from the video server's
internal memory, use a CompactFlash memory
card with a capacity of 16MB or greater.
CompactFlash memory cards are only used to
store alarm data that has been recorded into the
internal memory. This means that you cannot
directly record data onto the CompactFlash
memory cards or directly play back the data they
contain. All recording and playback is carried out
on data in the internal memory.
1
Insert a memory card into the PC card slot
at the front of the video server, while
making sure that the direction of the card
is correct, and then push the knob down
in the direction of the arrow.
This will lock the card in place.
A
Inserting the memory card
Check that the memory card is facing the right
way, and then insert it into the PC card slot until
it locks into place.
B
Removing the memory card
When you press the PC card eject button, the
card is unlocked, and the memory card can then
be pulled out.
A
2
Insert the expansion memory card.
The alarm data in the internal memory will be
automatically moved to the memory card.
The data will be deleted from the recording
areas of the internal memory at this time.
(Orange)
B
(Orange)
3
The ALARM DATA indicator (green) will
illuminate.
If alarms are repeatedly detected in this
condition, the alarm data will be automatically
moved to the memory card.
Note:
If there is no free space on the memory card,
the indicator will illuminate red. If this
happens, replace the memory card with
another card or delete the alarm data.
When inserting and removing the memory
card, make sure that H ALARM
BUFFERING is set to "OFF", and then turn
off the power.
The PC card slot is for 16-bit 5 V cards only.
Do not use 32-bit card bus types of card, as
the terminal sections are different.
New alarms cannot be received while alarm
data is being moved onto the memory card.
The video server is not equipped with a
formatting function. Use the computer to
format the memory card (only FAT formatting
is supported).
– 36 –
(Off)
(Green)
English

Advertisement

Table of Contents
loading

Table of Contents