D-Link DCS-2332L User Manual page 50
D-link cloud camera 2350 user manual
Hide thumbs
Also See for DCS-2332L:
- Manual del usuario (84 pages) ,
- Quick installation manual (77 pages) ,
- User manual (67 pages)
Table of Contents
Advertisement
Section 4: Configuration
Enable UPnP presentation:
Enabling this setting allows your camera to be configured
as a UPnP device on your network.
Enable UPnP port forwarding:
Enabling this setting allows the camera to add port
forwarding entries into the router automatically on a
UPnP capable network.
Enable PPPoE:
Enable this setting if your network uses PPPoE.
User Name / Password:
Enter the user name and password for your PPPoE
account. Re-enter your password in the Confirm Password
field. You may obtain this information from your ISP.
HTTP Port:
The default port number is 80.
Access Name for Stream 1~3:
The default name is video#.mjpg, where # is the number
of the stream.
HTTPS Port:
You may use a PC with a secure browser to connect to
the HTTPS port of the camera. The default port number
is 443.
Authentication:
Depending on your network security requirements, the Network Camera provides two types of security
settings for streaming via RTSP protocol: Disable and Digest. If Digest authentication is selected, user credentials
are encrypted using MD5 algorithm, thus providing better protection against unauthorized access.
RTSP Port:
The port number that you use for RTSP streaming to mobile devices, such as mobile phones or PDAs. The
default port number is 554. You may specify the address of a particular stream. For instance, live1.sdp can be
accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents the IP address of your camera.
Access name for stream 1 ~ 3:
This Network Camera supports multiple streams simultaneously. The access name is used to differentiate the
streaming source (video profile).
D-Link DCS-2332L User Manual
50
Hide quick links:
Advertisement
Table of Contents
