Table of Contents
Advertisement
Description
HOW TO:
Making Measurements
Using Overhead BER Test Function
Using Overhead BER Test Function
You can perform a Bit Error Rate test on chosen bytes of the section, line
and path overhead bytes.
You can access the transmit Overhead BER on the
display.
TEST FUNCTION
1 Set up the SONET transmit interface and payload required. See
"Setting SONET Transmit Interface " page 4.
2 Set up the receive SONET interface and payload as required. See
"Setting SONET Receive Interface " page 17.
3 Choose the overhead byte to be tested on the
TEST FUNCTION
4 Choose the overhead byte to be tested on the
TEST FUNCTION
5 Press
RUN/STOP
6 The PRBS pattern can be errored by pressing
68
.
display
display.
to start the test.
SONET
TRANSMIT
SONET
RECEIVE
SONET
TRANSMIT
.
SINGLE
Hide quick links:
Advertisement
Table of Contents
