Section 3 - Configuration
1. Log into the web-based configuration by opening a web
browser and entering http://dlinkapWXYZ.local. (on the Wi-
Fi Configuration Card) or the IP address of the DHP-W310AV
(192.168.0.50). Click on Setup > Wireless Settings.
2. In the Wireless Security Mode section, next to Security Mode,
select WEP from the drop-down menu.
3. Next to WEP Key Length, select a length that applies to all keys
from the drop-down menu. Click on 64-bit (10 hex digits) or
128-bit (26 hex digits).
4. Next to WEP Key 1, enter a WEP key that you created. Make sure
you enter this exact key on all your wireless devices.
5. Next to Authentication, select Both or Shared Key. (Shared
Key is the most secure.)
D-Link DHP-W311AV User Manual
Configuring WEP
38