Page 1
AUDIO MONITOR SPEAKER SYSTEM AMS-100 ANALOG MODULE BKAM-101 AES/EBU MODULE BKAM-102 SDI MODULE BKAM-103 INSTALLATION MANUAL 1st Edition...
Page 2
AMS-100 (SY) Serial No. 10001 and Higher BKAM-101 (SY) Serial No. 10001 and Higher BKAM-102 (SY) Serial No. 10001 and Higher BKAM-103 (SY) Serial No. 10001 and Higher...
4. Secure the optional board in the AMS-100 with the screws supplied with the optional board. B 3x5 If there is any unused slot without a cover, install the cover you have just removed there. B 3x5 BKAM-101, BKAM-102, BKAM-103 1-2(E) AMS-100...
: 6 pcs. Plate nut . Screw for rack mounting (RK5x16) : 4 pcs. . Washer for rack mounting : 4 pcs. (Sony part number : 2-297-913-00) Rack 12.7 15.9 15.9 Be sure to use the RMM-30 rack mount rail.
1-4. Rack Mounting 1-5. Pin Assignment of Connectors 1-5. Pin Assignment of Connectors 4. To mount the unit on the rack, while pressing the stoppers of the inner rails, slide the inner rails fully into the outer rails. REMOTE (D-sub 25-pin, Female) 5.
1-6. Matching Connectors and Cables 1-7. Internal Switches 1-6. Matching Connectors and Cables 1-7-2. SDI-43 Board (BKAM-103) When connecting cables to various connectors on the rear panel at the time of installing or servicing, connect the CN101 following connectors/cables or their equivalents.
. Let the unit warm up for about 10 minutes. service based on parts replacement (adjustments, board layouts, schematic diagrams, parts list, etc.). If this manual is required, contact your local Sony Sales Adjustment procedures Office/Service Center. 1. Press and hold the button corresponding to the desired slot for 3 seconds or more on the INPUT SELECT operation panel to enter Adjustment mode.
Page 9
The material contained in this manual consists of and all other exposed metal parts for AC information that is the property of Sony Corporation and leakage. Check leakage as described below. is intended solely for use by the purchasers of the equipment described in this manual.