Installation Guide hp StorageWorks AB232A PCI-X Host Bus Adapter Third Edition (June 2004) Part Number: AA–RU1ZC–TE This guide describes how to install, configure, and use the diagnostic utilities for the AB232A PCI-X host bus adapter for 64-bit Windows operating systems.
Page 2
Hewlett-Packard Company products are set forth in the express limited warranty statements for such products. Nothing herein should be construed as constituting an additional warranty. Printed in the U.S.A. AB232A PCI-X Host Bus Adapter Installation Guide Third Edition (June 2004) Part Number: AA–RU1ZC–TE...
This installation guide provides information to help you: Install, configure, and use the diagnostic utilities for the AB232A PCI-X host bus adapter for 64-bit Windows systems. Contact technical support for additional assistance. “About this Guide” topics include: Overview, page 8...
This book is intended for use by system administrators who are experienced with the following: Windows Server 2003 Enterprise Edition, 64-bit version Host bus adapters Related Documentation In addition to this guide, refer to the HP StorageWorks AB232A PCI-X Host Bus Adapter Release Notes. AB232A PCI-X Host Bus Adapter Installation Guide...
The following symbols may be found in the text of this guide. They have the following meanings. WARNING: directions in the warning could result in bodily harm or death. AB232A PCI-X Host Bus Adapter Installation Guide Table 1 Element Blue text:...
Contact with this surface could result in injury. To reduce the risk of personal injury from a hot WARNING: component, allow the surface to cool before touching. AB232A PCI-X Host Bus Adapter Installation Guide...
Getting Help If you still have a question after reading this guide, contact an HP authorized service provider or access our website http://www.hp.com. HP Technical Support Telephone numbers for worldwide technical support are listed on the HP website http://www.hp.com/support/. From this website, select the country of origin.
About this Guide HP Storage Website The HP website has the latest information on this product, as well as the latest drivers. Access storage at http://h18006.www1.hp.com/storage/saninfrastructure.html. From this website, select the appropriate product or solution. HP Authorized Reseller For the name of your nearest HP authorized reseller:...
Adapter Features This introduction to the AB232A PCI-X Host Bus Adapter (HBA) includes: Product Performance AB232A PCI-X Host Bus Adapter Installation Guide Description, page 14 Specifications, page 16...
Optical small form factor (LC) interface LC Fibre connector. Embedded optical shortwave laser, multi-mode Fibre Channel interface. AB232A is designed using a single custom Application Specific Integrated Circuit (ASIC). The custom ASIC implements a very high performance, multiclass, multiprotocol Fibre Channel host adapter with a 64-bit PCI-X bus connection.
Adapter Features Performance Specifications The AB232A HBA offers a highly integrated 2 Gbps Fibre Channel HBA for use in Itanium servers based on the latest PCI-X expansion bus. The features of the AB232A HBA provides the flexibility and broad interoperability needed for complex, highly scalable SANs.
Installation This chapter provides step-by-step instructions for installing the AB232A HBA, including: Hardware Requirements Recording Reference Numbers Installing the HBA into a Computer Verifying the Installation Configuration Guidelines This chapter also provides information on installation guidelines and supported configurations for the operating systems.
Installation Hardware Requirements The system hardware requirements for installing the HBAs include: AB232A HBA requires one open 64-bit/133 MHz PCI-X universal slot. Multimode fiber optic cable with LC connector, used with shortwave lasers. AB232A PCI-X Host Bus Adapter Installation Guide...
The WWN address and serial number are clearly marked on the HBA. Record the addresses on the lines below for future reference. Note: The WWN is a static identifier that cannot be changed. IEEE address: __________________________________________________ Serial number: __________________________________________________ AB232A PCI-X Host Bus Adapter Installation Guide Installation...
9. Secure the HBA mounting bracket to the computer panel with the panel screws. 10. Replace the computer cover and secure it using the previously removed screws. Be sure to observe the ESD precautions described on page 59 for AB232A PCI-X Host Bus Adapter Installation Guide...
Page 21
The HBAs do not allow normal data transmission on an optical link unless the link is connected to a similar or compatible laser product. That is, both products are multimode to multimode. AB232A PCI-X Host Bus Adapter Installation Guide Installation...
Fast blink (4 Hz) of this guide. The green LED indicates power functions and the lists normal LED indications. Green LED (L2) Blink (1 Hz) AB232A PCI-X Host Bus Adapter Installation Guide Table 2 State Wake-up failure (dead board) POST failure (dead board)
Consult the following sources for any restriction and for information on supported configurations specific to your operating system and topology. Release Notes HP Website at http://www.hp.com/country/us/eng/support.html. AB232A PCI-X Host Bus Adapter Installation Guide Installation...
Page 24
Installation AB232A PCI-X Host Bus Adapter Installation Guide...
PCI-X-to-Fibre Channel HBA is to operate. System managers must also have access to standard system documentation. HBA files are updated periodically. You can download the latest versions of the HBA driver kits from the HP website at http://h18000.www1.hp.com/storage/saninfrastructure.html. Note: This chapter describes the steps for installing the device driver and for accessing Fibre Channel storage devices.
StorageWorks Fibre Channel Storage subsystem (interconnect device and storage device) Installing or Upgrading a New Driver The AB232A HBA is a plug-and-play device that is detected by Windows operating systems. Perform the following steps to add or update the Windows driver to a previously installed Windows system: 1.
Installing the LightPulse Utility The LightPulse Utility, LpUtilNt (described in Utilities, on page 37) does not automatically load. HP recommends that after loading the HBA driver, you install LpUtilNt as follows: 1. Browse to the LighPulse folder on the Smart Setup CD-ROM (or to one downloaded from the web site if it is more recent).
Page 28
Installing the SCSI Miniport Driver AB232A PCI-X Host Bus Adapter Installation Guide...
The Power-On Self Test (POST) and the Windows Event Viewer are utilities you can use for troubleshooting the HBA. This chapter explains the use of these utilities in the event of an HBA problem. AB232A PCI-X Host Bus Adapter Installation Guide...
POST processing in progress Failure while functioning Failure while functioning Normal—1 Gb link rate Normal—2 Gb link rate Blink (1 Hz) Normal—link down or not yet started AB232A PCI-X Host Bus Adapter Installation Guide Table 3 on page 22 State...
6. Examine the entry at offset 0x10: if the low byte = En, match the low byte with the error found in page 34, and values. AB232A PCI-X Host Bus Adapter Installation Guide Table 5 on page 32, SCSI Port Error Log. Table 7...
Page 36
IOERR_RESERVED IOERR_RESERVED IOERR_RESERVED IOERR_ABORT_MULTI_ REQUESTED IOERR_RESERVED IOERR_RESERVED IOERR_LINK_BUFFER_ SHORTAGE IOERR_RCV_XRIBUF_WAITING AB232A PCI-X Host Bus Adapter Installation Guide Further Information FC_AL target not responding. Received our own transmitted frame back. Port may be bypassed by a hub. Possible bad cable/link noise...
This chapter contains instructions for using the LightPulse Utility, LpUtilNt, a Windows-based graphical user interface. Use this utility to update firmware, BIOS, view registry parameters, perform persistent binding operations on selected targets, and obtain specific information about all HBAs installed in the server. AB232A PCI-X Host Bus Adapter Installation Guide...
LightPulse Utilitycan operate properly. You can alternately set the registry parameter Simulate Device=1. LightPulse Utility does not load automatically on Windows Server 2003 systems. HP recommends that you install the LightPulse utility after installing the HBA drivers as described in the section on page 27.
7. Click Open. Note: The new software is transferred to the HBA. 8. Expand the category list and choose Adapter Revision Levels. 9. Verify that the new firmware revision is shown. AB232A PCI-X Host Bus Adapter Installation Guide Diagnostic and Configuration Utilities...
Choose Global to change the global registry entry. Otherwise, the change is made to the HBA-specific registry entry. Do not modify the registry parameters unless specifically instructed AB232A PCI-X Host Bus Adapter Installation Guide...
Page 41
FrameSizeMSB = n HardALPA = 0xn LinkTimeOut = n LogErrors = n NodeTimeOut = n AB232A PCI-X Host Bus Adapter Installation Guide Diagnostic and Configuration Utilities Description Values from 0x00 – 0xFF. Controls NT SRB error status for general Abort conditions.
Page 42
256. Represents time-out between phases of Off-line to On-line protocol. Values 0 or 1. Default = 0. 0 = Lowest AL_PA = Lowest physical disk (ascending AL_PA order). 1 = Highest AL_PA = Lowest Physical Disk (ascending SEL_ID order). AB232A PCI-X Host Bus Adapter Installation Guide...
Page 43
SimulateDevice = n SnsALL = n Topology = n TrafficCop = n AB232A PCI-X Host Bus Adapter Installation Guide Diagnostic and Configuration Utilities Description Values from 0-2. Default = 0. Controls which driver interface to use. 0 = automode; attempt SLI-2 first. If that fails, uses SLI-1.
5. If required, change the Bind Type for the target. 6. If required, change the SCSI Bus and SCSI ID values. 7. Click OK. The letters PB display next to the target row. AB232A PCI-X Host Bus Adapter Installation Guide Figure Diagnostic and Configuration Utilities...
— Unless LUNs were previously mapped, if LUN Automap is disabled for the target, no LUNs will be mapped when you reboot the system. — If LUN Unmasking is disabled for the target, the HBA can see all LUNS behind a specific target. AB232A PCI-X Host Bus Adapter Installation Guide...
Enable the external loopback tests by choosing 1=Y. The default is disabled, 0=No. Internal BIU PCI loopback and other loopback tests are run automatically. b. Choose 0=No if you do not have an external loopback connector. AB232A PCI-X Host Bus Adapter Installation Guide Diagnostic and Configuration Utilities Figure...
Choose this option to update firmware or non-volatile parameters in the flash ROM. This option also displays program images (load list) stored in the HBA memory. You must reboot the HBA for the new firmware to take effect. AB232A PCI-X Host Bus Adapter Installation Guide...
Status/Counters Info Link Status Link Attention Quit the LightPulse Utility Choose this option to exit the program. A warning message indicates if any errors were encountered during the session. AB232A PCI-X Host Bus Adapter Installation Guide Diagnostic and Configuration Utilities...
Page 50
Diagnostic and Configuration Utilities AB232A PCI-X Host Bus Adapter Installation Guide...
Regulatory Compliance Notices This appendix covers the following topics: Federal Communications Commission Canadian Notice (Avis European Union Japanese Laser Safety, page 58 AB232A PCI-X Host Bus Adapter Installation Guide Canadien), page 54 Notice, page 55 Notice, page 56 Notice, page 52...
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. AB232A PCI-X Host Bus Adapter Installation Guide...
DECLARATION D'INSTALLATION ET DE MISE EN EXPLOITATION d'un matériel de traitement de l'information (ATI), classé A en fonction des niveaux de perturbations radioélectriques émis, définis dans la norme européenne EN 55022 concernant la Compatibilité Electromagnétique. AB232A PCI-X Host Bus Adapter Installation Guide Regulatory Compliance Notices...
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. AB232A PCI-X Host Bus Adapter Installation Guide...
IEC61000-4-5, IEC61000-4-6, IEC61000-4-8, IEC61000-4-11)-Electromagnetic Immunity EN60950 (IEC60950)-Product Safety Power Quality: (IEC610000-3-2)-Harmonics and (IEC61000-3-3)-Voltage Fluctuations and Flicker Also approved under UL 1950, 3rd Edition/CSA C22.2 No. 950-95, Safety of Information Technology Equipment AB232A PCI-X Host Bus Adapter Installation Guide Regulatory Compliance Notices...
Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified herein. • Allow only HP authorized service technicians to repair the laser device. Certification and Classification Information This product contains a laser internal to the Optical Link Module (OLM) for connection to the Fiber communications port.
Place parts on a grounded surface before removing them from their containers. Avoid touching pins, leads, or circuitry. Always make sure you are properly grounded when touching a static-sensitive component or assembly. AB232A PCI-X Host Bus Adapter Installation Guide...
If you do not have any of the suggested equipment for proper grounding, have an HP authorized reseller install the part. Note: For more information on static electricity, or for assistance with product installation, contact your HP authorized reseller. AB232A PCI-X Host Bus Adapter Installation Guide...
European Union notice AB232A PCI-X Host Bus Adapter Installation Guide HBAs class A compliance notice compliance statement, cables Federal Communications Commission (FCC) notice flash ROM, updating parameters in getting help...
Page 62
POST LED results Windows Event Viewer udating drivers utilities, LightPulse 27, viewing HBA parameters websites, HP storage Windows Event log Event Viewer installing or updating drivers loading LightPulse utility SCSI Miniport drivers system requirements AB232A PCI-X Host Bus Adapter Installation Guide...