Required Equipment
•
#1 Phillips screwdriver.
Removal Procedure
1.
Unplug the AC adapter, if present, and then remove the battery.
2.
Remove the keyboard cover (page 2-12).
3.
Disconnect both the 2-wire and 4-wire cables that connect the switchboard PCA to the top case
and speaker assembly, respectively.
4.
Remove the M2.5×4.0 mm screw that secures the keyboard and switchboard PCA to the top case
(page 2-26).
5.
Gently lift up on the keyboard, carefully remove the switchboard PCA from the top case, and then
disconnect the underside motherboard cable.
HP Pavilion 4300, 4200, and 4100, HP nx9005 and nx9000,
Compaq Evo Notebook N1050 and 1010, and Compaq Presario 2100 and 1100 Models
2-18
Removal and Replacement
Figure 2-13. Removing the Switchboard PCA
Service Manual