Table of Contents
Advertisement
The following notations are used to place special emphasis on procedures, or to call
attention to precautionary measures.
Warning
Caution
Note
General Safety Precautions
The following are general safety precautions that are not related to any specific procedures
and therefore do not appear elsewhere in this publication. These are recommended
precautions that personnel must understand and apply, in addition to the precautions
listed in the
Information for Safe, Efficient Operation
Warning
High
Voltage
WARNINGS, CAUTIONS AND NOTES
An operating procedure, practice and so forth, which if not
followed correctly, could result in personal injury, or loss of
life.
An operating procedure, practice and so forth, which if not
followed correctly, could result in damage to, or destruction of
equipment.
An operating procedure, condition and so forth, to which special
attention should be paid.
Do not touch the antenna and the RF connectors when the
transceiver operates.
During transmission, high RF voltages appear at the RF
connectors, the antenna cables, and on the antenna itself.
These voltages may cause severe injury or even death on
contact.
Operating and maintenance personnel must be familiar with
the applicable safety requirements before attempting to install
or operate the transceiver. Severe injury or death could result
from failure to comply with the safety practices.
section.
Advertisement
Table of Contents
