Appendix Packing List Open the shipping carton and carefully remove all items. Ascertain that you have: (1) One SmartAX MT880 ADSL Router (2) Two twisted-pair telephone cable (3) One straight-through Ethernet cable (4) One dedicated power adapter (5) One Splitter...
MT880 Overview MT880 gives full consideration to the household arrangements, enabling horizontal and vertical positions as well as hanging on the wall. Please refer to the Appendix to erect MT880 on your table. Figure 1 MT880 Profile Figure 2 Rear Panel Cable and Power Connections •...
In order to observe the LEDs, place the MT880 in a location where is easy to move it. Figure 3 Front Panel Display with LED Indicators The LED Indicators read as follows: Status Description Indicator Power Steady green light The unit is powered on. ADSL LINK Steady green light A valid ADSL connection.
• PHONE: Connect to the telephone sets; • MODEM: Connect the ADSL port of MT880. Ethernet NIC Computer is connected to MT880 through the Ethernet port on MT880. Ensure your computer is configured with NIC adapter as well as Ethernet port.
Page 8
(1) Computer (2) RJ-11 Tel Cable (3) Phone (4) Ethernet Cable (5) Splitter (6) Phone Jack (7) MT880 (8) RJ-11 Tel Cable Figure 4 Computer to MT880 Connection Note: Use cross-over cable to connect MT880 and the uplink port of a switch or hub.
Quick Troubleshooting Failures Instructions Ensure the power adapter is well connected; Power light is out. Ensure the right power adapter is used; Ensure the ADSL line is well connected; Ensure the telephone line before entering the house is valid, try to test with a telephone; Check that there is no junction box before ADSL LINK light is connecting MT880, which has such components like...
(3) Ensure no telephone or fax machine is connected directly to the ADSL subscriber line; (4) Update the old ISA NIC with new driver or replace it with a new 10/100M PCI NIC; (5) Find help on the Web site of http://support.huawei.com;...
Page 11
(6) Contact your ISP as a last resort; 2. How to connect multiple telephones? Make sure you have splitter installed before telephones. Otherwise, there might be noise on the line. Please find help from the figure below. (1) Phone (2) Phone Socket (3) Phone (4) RJ-11 Tel Cable (5) Splitter...
Page 12
losing of voice quality or data rate. 5. Why can’t I access the Internet by using virtual dialing through Microsoft’s Internet Gateway? Internet Gateway supports PPPoE itself. It is not proper to install other PPPoE terminal software, such as Enternet300. 6.
Technical Specifications General Specifications ITU-T G.992.5 ITU G.994.1 (G.hs) STANDARDS: ITU-T G.992.5 Annex L G.992.5 (ADSL2+): downstream rate of 24 Mbps, and upstream rate of 1.2 Mbps Data Transfer Rate: G.992.5 Annex L: Max. transmission distance of 6.5 kilometers One RJ-11 ports for ADSL line connection External Interface: One RJ-45 port for 10/100 Base-T Ethernet connection...
Appendix MT880 enables horizontal and vertical positions as well as hanging on the wall. When in vertical position, the MT880 body should be assembled with the stand with the following steps. Before the installation, you have to notice that there is an L-shaped chip on the stand, which can be inserted into the wider slot on the back of MT880 body.