Table of Contents
Advertisement
Preparation
Setting the temperature and duration
^ Fill the water container with mains tap water up to at least
the "min" marker. You do not need to remove the insert.
Only use mains tap water. Never use distilled or mineral
water or other liquids.
^ Push the water container into the appliance until it
connects.
If the water container is not positioned correctly, the
appliance will not heat up and after a while F20 will appear in
the display (see "Problem solving guide").
^ Place the food in the oven.
^ Touch the s sensor to switch the appliance on.
"100" will appear in the display and the "°C" will start flashing.
^ If you want to cook with 100 °C, confirm the setting with
"OK".
If necessary, you can reduce the temperature by touching the
? sensor. Confirm with "OK".
After confirming the temperature, 3 zeros will appear in
display and "h" will start flashing.
^ Set the cooking duration you want by touching ; (from
0:00 upwards) or ? (from 9:59 downwards).
^ Confirm your selection by touching "OK".
The appliance will start automatically after the duration has
been confirmed.
If you do not complete these steps within 15 minutes, the
appliance will switch itself off.
Operating principles
21
- Quick Links:
- Guide to the Appliance
- Front View
- Control Panel
Hide quick links:
Advertisement
Table of Contents
