Adjusting The Optional Monitor Stand; Mounting The Monitor; Connecting The Cables - HP L6015tm User Manual

Retail touch monitors
Table of Contents

Advertisement

Adjusting the Optional Monitor Stand

You can adjust the monitor stand height and tilt to a variety of positions. Choose a position that is the
most ergonomically appropriate for your usage.
NOTE:
Tilt range is -5 degrees forward to +60 degrees backward.
Figure 2-19

Mounting the Monitor

The monitor panel can be attached to a wall, swing arm, or other mounting fixture.
NOTE:
This apparatus is intended to be supported by UL or CSA Listed wall mount bracket.
1.
Remove the four screws from the VESA mounting holes on the back of the monitor.
CAUTION:
attach a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long
screws are required. Longer screws must not be used because they may damage the monitor. It
is important to verify that the manufacturer's mounting solution is compliant with the VESA
standard and is rated to support the weight of the monitor display panel. For best performance, it
is important to use the power and video cables provided with the monitor.
2.
To attach the monitor to a mounting fixture, insert the four screws that were previously removed
through the holes on the mounting fixture and into the mounting holes on the monitor. Follow the
manufacturer's documentation provided with the mounting fixture for additional assembly
instructions.
3.
Connect the required cables to the monitor panel and PC.

Connecting the Cables

NOTE:
If the monitor is attached to the optional stand, route the cables through the stand as
described in
1.
Place the monitor in a convenient, well-ventilated location near the computer.
Adjusting the Optional Monitor Stand
This monitor supports the VESA industry standard 100 mm mounting holes. To
Routing Cables through the Optional Monitor Stand on page
11.
Mounting the Monitor
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

L6017tm

Table of Contents