Table of Contents
Advertisement
PC 2120 All-in-One 12.1" TFT LCD Panel PC User's Manual
3.10
Expansion Slot
The PC 2120 series can be equipped with or without any expansion
slot. As for the PC 2120 series, this comes as a standard system
feature. If the system comes with expansion capability, then the
system includes a PCI expansion riser card to accommodate a PCI
device at a given time. Due to the internal space limitation, only a
half-size expansion card can be adapted. To use the PCI expansion,
refer to the following figure and follow the installation instructions
below;
Plug a PCI card into the PCI slot on the riser card and fix all
connectors of the expansion card will come out from the expansion
outlet on the bottom side of the chassis for further cable connection.
Unscrew the metal slip located inside the expansion
z
outlet.
Plug the riser card into the onboard PCI slot first.
z
Screw the metal opening to the power supply bracket
z
and the multi-I/O conversion metal piece.
Plug a PCI card into the PCI slot on the riser card and
z
screw
the
expansion
compartment. All the connectors of the expansion card
will come out from the opening on the rear cover for
further cable connection.
Screw the rear cover to the chassis.
z
Please also note that the total height of the system with expansion
slot is 93 mm.
Hardware Installation
card
to
the
metal
front
21
Advertisement
Table of Contents
