1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SCD-2080E
  6. User manual

Samsung SCD-2080E User Manual

High resolution varifocal dome camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
High Resolution Varifocal
Dome Camera SCD-2080E
User Manual
SCD-2080E

Advertisement

Table of Contents
loading

Related Manuals for Samsung SCD-2080E

Summary of Contents for Samsung SCD-2080E

  • Page 1 High Resolution Varifocal Dome Camera SCD-2080E User Manual SCD-2080E...

  • Page 2: User Manual

    Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
  • Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description. ■ SCD-2080E SERIES • NTSC MODEL • PAL MODEL SCD-2080EN SCD-2080EP ■ MODEL DESCRIPTION • SCD-2080EX _ SIGNAL SYSTEM •...

  • Page 4: Safety Information

    safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CAUTION: COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
  • Page 5 Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers fi lled with water on top of the camera. doing so may cause personal injury due to fi re, electric shock, or falling objects. Do not install the unit in humid, dusty, or sooty locations. doing so may cause fi re or electric shock.

  • Page 6: Fcc Statement

    safety information FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation.

  • Page 7: Important Safety Instructions

    important safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi...

  • Page 8: Table Of Contents

    contents INTRODUCTION Features What’s included Component names and functions INSTALLATION Installation Adjust the panning and tilting while watching the monitor CONNECTION Connecting to Monitor Connecting to Power Using Coaxial Communications SETUP Menu Confi gration Menu Setup TROUBLESHOOTING Troubleshooting SPECIFICATIONS Specifi cations Dimension 8_ contents...
  • Page 9 introduction FEATURES High Resolution By adopting a diagonal 6mm(1/3”) 410,000 (NTSC) pixel, 470,000(PAL) pixel SONY CCD, the camera produces clear picture quality with a horizontal resolution of 600 TV lines in color mode. Excellent Sensitivity The built-in high sensitivity COLOR CCD produces a clear image. - Color : 0.15Lux(50IRE, @F1.2), 0.0003LUX (SENS-UP, x512) SSNR3 (Samsung Super Noise Reduction) Function The high-performance W-V DSP chip effectively removes low-light gain noise...

  • Page 10: What's Included

    WHAT’S INCLUDED Check if the following items are included in the product package. High Resolution Varifocal High Resolution Varifocal Dome Camera SCD-2080E Dome Camera User Manual Quick Set-up Guide SCD-2080E SCD-2080E SCD-2080E User Manual Quick Set-up Guide Installation Video...

  • Page 11: Component Names And Functions

    COMPONENT NAMES AND FUNCTIONS FRONT Pan Base : Control panning angle of camera. Rotate Base : Control rotating angle of camera. x3.6 Vari-focal Lens Module 2.8 ~ 10.0mm (F1.2) Video Output Terminal to Monitor Function Setup switch : Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item.

  • Page 12: Installation

    installation INSTALLATION Separate the dome cover by turning anti-clockwise. Separate the shield case by pulling from the camera body. * To install the dome cover on the camera body, turn the latches in locking direction as Latch shown in the [Figure-1]. Locking direction Main Body [Figure-1]...
  • Page 13 WHEN USING THE CEILING BRACKET Ceiling bracket An arrow for installing directions M4 tapping screw (provided) CAMERA Locking direction Unlocking direction Dome cover Hold the ceiling bracket (located where the arrow points to) and separate it from the main body of the camera by rotating it anti-clockwise. (refer to the picture in 'Notes' on page 13) Place the separated ceiling bracket so that the “Front”...

  • Page 14: Installation

    installation Pan Base fixation screw M4 tapping screw [Figure-2]  If you want to install the camera with the ceiling bracket together, fi x them using two M4 tapping screws at the side of the main body (refer to the [Figure-2] on page 14) 14_ installation...

  • Page 15: Adjust The Panning And Tilting

    ADJUST THE PANNING AND TILTING WHILE WATCHING THE MONITOR 73˚ 174˚ 176˚ Rotate Base Tilt Base Pan Base You can adjust camera to any direction by using Pan, Tilt, Rotate mechanism. Pan Base moves by 176˚ to each side direction and 352˚ on the whole. Tilt Base covers total 73˚...

  • Page 16: Connection

    connection CONNECTING TO MONITOR Connect the VIDEO-OUT jack to the VIDEO-IN jack of the monitor. CCTV Camera Monitor As the connecting method varies with the instruments, refer to the manual supplied with the instrument. If necessary, you can connect the monitor to the REMOTE jack on the back of your camera. Only connect the cable when the power is turned off.

  • Page 17: Using Coaxial Communications

     Be sure to connect power only after all the installation is complete.  Note that DC adaptor is not supplied with camera.  Ground should be connected to the GND terminal. USING COAXIAL COMMUNICATIONS Coaxial Communications System OSD Control method CAMERA CONTROLLER MENU/ENTER...

  • Page 18: Setup

    setup MENU CONFIGRATION MAIN SETUP ● LENS ● ● ● BRIGHTNESS SHUTTER EXPOSURE ● ● SENS-UP RETURN ● ATW ● OUTDOOR ● INDOOR WHITE BAL ● MANUAL ● AWC SET ● ● SSDR ● ● ● BACKLIGHT ● ● SSNR3 ●...
  • Page 19 MAIN SETUP 1.LENS Select the function Change the status 2.EXPOSURE using the Function using the Function Setup switch. Setup switch. 3.WHITE BAL 4.SSDR 5.BACKLIGHT 6.SSNR3 7.DAY/NIGHT AUTO 8.SPECIAL 9.EXIT SAVE Select a desired function using the Function Setup switch. Place the cursor over a desired item. Set up a selected item by using the Function Setup switch.
  • Page 20 setup BRIGHTNESS : Adjusts the video brightness. EXPOSURE SETUP SHUTTER : You can select the shutter. 1.BRIGHTNESS 2.SHUTTER A.FLK : Select this when you 3.AGC HIGH experience picture fl icker, which can 4.SENS-UP happen when there is a clash with the 5.RETURN frequency of the installed lighting.
  • Page 21 WHITE BAL (WHITE BALANCE) Use the White Balance function to adjust the screen color. When the SETUP menu screen is displayed, MAIN SETUP select ‘White Bal’ by using the Function 1.LENS Setup switch so that the arrow indicates 2.EXPOSURE ‘White Bal’. 3.WHITE BAL Select a desired mode using the Function 4.SSDR...
  • Page 22 SSDR ON SSDR OFF BACKLIGHT The SCD-2080E is designed so that it delivers a distinctive subject and background at the same MAIN SETUP time, even when the subject is in backlight, by 1.LENS 2.EXPOSURE...
  • Page 23 BLC : Enables a user to directly select a BLC SETUP desired area from a picture and to LEVEL MIDDLE view the area more clearly. LEVEL : Adjusts the brightness level of a BOTTOM monitoring area. LEFT RIGHT TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
  • Page 24 setup SSNR3 This function reduces the background noise in a low luminance environment. When the SETUP menu screen is displayed, MAIN SETUP select 'SSNR3' by using the Function Setup 1.LENS switch so that the arrow indicates 'SSNR3' . 2.EXPOSURE Select a desired mode using the Function 3.WHITE BAL Setup switch.
  • Page 25 COLOR : The picture is always displayed in color. B/W : The picture is always displayed in black and white. You can turn on or off the burst signal on B/W mode. AUTO : The mode is switched to ’Color AUTO SETUP ‘...
  • Page 26 setup SPECIAL When the SETUP menu screen is displayed, MAIN SETUP select ‘SPECIAL’ by using the Function 1.LENS Setup switch so that the arrow indicates 2.EXPOSURE ‘SPECIAL’. 3.WHITE BAL 4.SSDR 5.BACKLIGHT 6.SSNR3 7.DAY/NIGHT AUTO 8.SPECIAL 9.EXIT SAVE Select a desired mode using the Function SPECIAL Setup switch.
  • Page 27  When the V-REV or H-REV mode is enabled, the text on the screen does not flip.  If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear. Monitor : Please change the settings value of video appropriate to your monitor. LCD : Please select this menu item when LCD MONITOR using an LCD monitor.
  • Page 28 setup  When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one.  English and Numbers are available in the mode.  If you move the cursor to CLR and press the Function Setup switch, all the letters are deleted. To edit a letter, change the cursor to the bottom left arrow and press the Function Setup switch.
  • Page 29 AREA MODE : Determines whether to use the MD area selected in SENSITIVITY. SEL POS : Determines which of the 4 vertices of each MD area is to be used. XPOS : Determines the coordinate of the horizontal axis for SEL POS. YPOS : Determines the coordinate of the vertical axis for SEL POS.
  • Page 30 setup LANGUAGE : You can select the menu language according to your requirements. RETURN : Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu. EXIT Select a desired EXIT mode using the Function Setup switch depending on the camera purpose.

  • Page 31: Troubleshooting

    troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. PROBLEM SOLUTION Nothing appears on the screen. Check that the power cord and line connection between the camera and monitor are fi...

  • Page 32: Specifications

    specifications SPECIFICATIONS SCD-2080EN SCD-2080EP ELECTRICAL Input Voltage DC 12V / AC 24V Power Consumption Max 3.5W VIDEO Imaging Device 1/3 inch, Diagonal 6mm Super HAD CCD Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Scanning System 2:1 Interlace Synchronization...
  • Page 33 SCD-2080EN SCD-2080EP Day & Night COLOR / BW / AUTO (S/W Type) Gain Control Low / High / Off White Balance ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K) SENS-UP (frame Integration) Auto / Off (Selectable x2 ~ x512) Motion Detection On / Off (8 Programmable zones) Privacy Masking...

  • Page 34: Dimension

    specifications DIMENSION Ø107.6 83.7mm 81.6mm 34_ specifi cations...

  • Page 35: Declaration Of Conformity

    Conformance to EN 55022 : 2006 EN 50130-4 : 2003 We, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s). Manufacturer SAMSUNG TECHWIN CO., LTD Legal Representative in Europe Signature Signature Full Name BONJENG GU...
  • Page 36 MEMO...
  • Page 37 MEMO...
  • Page 38 MEMO...
  • Page 39 MEMO...
  • Page 40 SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Park...

Table of Contents