1-3. FRONT PANEL REMOVAL
Remove 2 screws (+BVTP 3 x 8
1
Type 2 IT-3) mounting the front
panel to the bottom of the chassis.
Gently pry the tabs from the bottom
2
of the unit to release.
Remove the ribbon cables from the
3
A Board.
From the left of the unit, gently pry
4
the tabs from the side and top to
release them.
From the right of the unit, gently pry
5
the tabs from the side and top to
release them. Gently pull the front
panel forward to remove.
3
1
2
— 7 —
4
5
SAT-HD100