Table of Contents
Advertisement
Alarm input
You can set the alarm input type, activation time, and operation mode.
1.
From the Setup menu, select the
<Event (
)> tab.
2.
Click <Alarm input>.
To set the Alarm input
1.
Set <Input device setup> to <Enable>.
2.
Specify the <Type>.
Type
-
Normal Open : It is normally open,
but if it is closed, an alarm will be
triggered.
-
Normal Close : It is normally
closed, but if it is open, an alarm will be triggered.
3.
Specify the <Activation time>.
Always : Always check if an alarm occurs. It activates in operated mode when the
alarm occurs.
Only scheduled time : Check if an alarm occurs at a specifi ed day of the week for
a specifi ed time period. It activates in operated mode when the alarm occurs.
4.
Specify an operation that will perform if an alarm occurs.
Alarm output : Specify the alarm output time in the alarm input setup.
E-mail sending : Specify the use of email transfer in the alarm input setup.
Record : Specify the use of recording in the alarm input setup.
Goto Preset : Moves to the specifi ed preset location when setting the alarm input.
5.
When done, click [Apply (
)].
English _55
Advertisement
Table of Contents
