Table of Contents
Advertisement
Display Setting
1. Press.SETUP
[General Setting] menu.is.displayed.
2. Press to.select.[Display Setting],.
then.press...
3. Select.an.option,.press to.access.
... Display Setting...
TV
Video Process
Motion Vide...
Move cursor key to select menu option
then use "OK " key to select
4. Press / to.select.a.setup.option.and
press ..
5. Select.the.setting.you.wish.to.change
and press OK to confirm.
-.Press to.return.to.the.previous.
menu.
-.Press SETUP.to.exit.the.menu..
[TV]
• [TV Screen]
Select.the.screen.format.according.to.
how.you.want.the.picture.to.appear.on.
the.TV.
{16:9 Full}.–.for.a.disc.with.the.aspect.
ratio.of.4:3,.the.output.video.is.
stretched.into.16:9.full.screen.
{16:9 Normal}.–.for.a.disc.with.the.
aspect.ratio.of.4:3,.the.output.video.is.
resized vertically to match what will be
seen.on.the.display.
{4:3 Pan&Scan}.–.for.standard.TV,.
Display.a.wide.picture.on.the.entire.
screen.and.cuts.off.the.redundant.
portions.
{4:3 Letterbox}.–.for.standard.TV,.
Display.a.wide.picture.with.two.black.
borders.on.the.top.and.bottom.of.4:3.
screen.
• [Resolution]
Select.a.video.output.resolution.that.is.
compatible.with.your.TV.display.
capability.
{Auto}.–.Select.the.most.suitable.
resolution.according.to.the.TV..
{480I/576I},.{480P/576P},.
{720P},.{1080I},.{1080P}.
–.Select.a.video.resolution.setting.that.
is.best.supported.by.the.TV. See.TV.
manual.for.details.
1
TV Screen
16:9 Normal
Resolution
Auto
Color Space
YCbCr422
HDMI Deep Color
Off
HDMI 1080P 24F
On
SETUP Exit
Note:
-When resolution is set to 720p/1080i/1080p:
(1) If only CVBS connected, the resolution of CVBS
video output will be set to 480i/576i automatically.
(2) If HDMI and CVBS are both connected, there will
be no CVBS video output, instead, a message will be
shown as follows:
Out Of Range:Check Display Resolution
• [Color Space]
Select a predefined Colour space of
picture.
{RGB}.–.select.RGB.Colour.space.
{YCbCr}.–.select.YCbCr.Colour.space.
{YCbCr422}.–.Select.YCbCr422.Colour.
space.
{Full RGB}.–.select.Full.RGB.Colour.
space.
• [HDMI Deep Color]
This.feature.is.available.only.when.the.
display.device.is.connected.by.a.HDMI.
cable,.and.when.it.supports.deep.Colour.
feature.
{30 bits}.–.Output.30.bits.Colour.
{36 bits}.–.Output.36.bits.Colour.
{Off}.–.Output.standard.24.bit.Colour.
Note:
-When the colour space is "YCbCr422", even if
HDMI Deep Colour is set to 30bits/36bits, it is not
output with Deep Colour.
• [HDMI 1080p 24F]
{On}.–.Enable.1080p.24F.video.
resolution.setting.
{Off}.–.Disable.1080p.24F.video.
resolution.setting.
About HDMI 1080p 24F Notes:
If you want the 24Hz output, it should fulfill below 3
conditions:
1.TV supports the 24Hz display:
2.Player choose the 24Hz option in the setup menu;
3.Media must be the 24Hz video.
Notes:
-This resolution becomes effective only when the
playing BD-Disc contents are Film source.
-During HDMI 1080p 24F playback, there will be no
composite output.
[Video Process]
... Display Setting...
TV
Video Adjust
Video Process
Sharpness
Motion Video...
Move cursor key to select menu option
then use "OK " key to select
More...
Low
SETUP Exit
Advertisement
Table of Contents
