Configure Wpa-Enterprise (Radius) - D-Link DIR-615 User Manual
Wireless n 300 router
Hide thumbs
Also See for DIR-615:
- User manual (208 pages) ,
- Quick installation manual (44 pages) ,
- Training manual (37 pages)
Table of Contents
Advertisement
Section 4 - Security
Configure WPA-Enterprise (RADIUS)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1.. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on.Setup..
and then click.Wireless.Settings on the left side.
2. Select the Manual Wireless Connection Setup Button.
3. Next to Security Mode, select WPA-Enterprise.
Note: The user must disable Wi-Fi Protected Setup in order to select WPA-Enterprise.
4. Next to WPA Mode, select Auto, WPA2.Only, or.WPA.Only. Use Auto if you have
wireless clients using both WPA and WPA2.
5. Next to Cypher Type, select TKIP.and.AES, TKIP, or AES. If you have wireless
clients that use both types, use TKIP.and.AES.
6. Next to Group Key Update Interval, enter the amount of time before the group
key used for broadcast and multicast data is changed (3600 is default).
7. Next to Authentication Timeout, enter the amount of time before a client is
required to re-authenticate (60 minutes is default).
8. Next to RADIUS Server IP Address enter the IP Address of your RADIUS server.
9. Next to RADIUS Server Port, enter the port you are using with your RADIUS server.
1812 is the default port.
10. Next to RADIUS Server Shared Secret, enter the security key.
11. If the MAC Address Authentication box is selected then the user will need to
connect from the same computer whenever logging into the wireless network.
D-Link DIR-615 User Manual
.
72
Advertisement
Table of Contents
