Table of Contents
Advertisement
Available languages
Available languages
Toshiba Hi Speed Port ReplicatorII_UM.fm Page 8 Thursday, January 13, 2011 1:38 PM
TOSHIBA Hi-Speed Port Replicator II
Component
LAN connected light
RGB monitor port
HDMI out port
DisplayPort
DC-IN (19V)
Security lock slot
Serial port
Port Replicator lock
switch
Universal Serial Bus
(USB 2.0) ports
Universal Serial Bus
(USB 3.0) ports
NOTE
■
Certain USB devices, such as optical disk drives and hard disk drives, have high power
requirements. Due to the power output limitations of the USB ports, you may not be able to operate
more than one such device at a time.
■
If your USB device came with an AC adaptor, be sure to connect the device to a power outlet with
the AC adaptor, in addition to connecting the device to the port replicator with a USB cable.
■
Booting from USB 3.0 ports is only available if your computer supports it.
EN-8
Description
Glows green to indicate the computer is connected to a LAN hub.
Connection point for an analog VGA monitor.
HDMI out port can connect with Type A connector HDMI cable, or a
DVI monitor with use of the included HDMI to DVI cable.
HDMI cable can send video and audio signals. In addition to this,
it can send and receive control signals.
Some models are equipped with a HDMI out port.
One DisplayPort is provided on your port replicator.
Note: HDMI port and DisplayPort can not be used at the same time.
You can move the slider of your port replicator to choose either HDMI
port or DisplayPort.
Socket for AC adaptor.
Attachment point for an optional security cable (not included) used to
deter theft.
Note: The Security lock slot works only for this port replicator.
connection point for a serial device.
Due to the USB to Serial emulation limitations, not all legacy serial
devices may work.
Switch to lock or unlock the Eject lever. When the Port Replicator lock
switch is in the locked position, the Eject lever cannot be operated.
Connection points for USB 2.0 or 1.1 devices. Four USB ports are
provided on the back of the port replicator.
Connection points for USB 3.0 or 2.0 or 1.1 devices. Two USB ports
are provided on the back of the port replicator.
User's Manual
Hide quick links:
Advertisement
Chapters
Table of Contents
