Table of Contents
Advertisement
1.1.2
1
(1) Ethernet port
A socket for Ethernet connection supporting 10BASE-T/100BASE-TX.
Both UTP and STP cables may be used.
This product uses this port to connect to a network and to provide its various
functions.
(2) Target port
Devices with serial consoles or serial controlled devices (e.g. measuring
instruments) are connected to this port. The connector type is an RJ45 modular
jack, and it uses a straight Cat5 UTP or STP cable used for Ethernet
communications. This uses the RS-232C signal and is assigned six types of
signal lines (RxD/TxD/CTS/RTS/DSR/DTR) and a ground wire. The following is
the pin alignment:
SERVIS IP-Serial
4
1p Converter
User's Guide
Rear
(3) Local console port
(2) Target port
(1) Ethernet port
1 : CTS
2 : DSR
3 : RxD
8
1
4 : GND
5 : GND
6 : TxD
7 : DTR
8 : RTS
(5) Adapter holding
clamp
(4) Power jack
Advertisement
Table of Contents
