D-Link NetDefend DFL-210 User Manual page 219

Network security firewall
Hide thumbs Also See for NetDefend DFL-210:
Table of Contents

Advertisement

6.2.7. The SIP ALG
SIP Usage Scenarios
NetDefendOS supports a variety of SIP usage scenarios. The following three scenarios cover nearly
all possible types of usage:
Scenario 1
Protecting local clients - Proxy located on the Internet
The SIP session is between a client on the local, protected side of the D-Link Firewall and a
client which is on the external, unprotected side. The SIP proxy is located on the external,
unprotected side of the D-Link Firewall. Communication typically takes place across the public
Internet with clients on the internal, protected side registering with a proxy on the public,
unprotected side.
Scenario 2
Protecting proxy and local clients - Proxy on the same network as clients
The SIP session is between a client on the local, protected side of the D-Link Firewall and a
client which is on the external, unprotected side. The SIP proxy is located on the local, protected
side of the D-Link Firewall and can handle registrations from both clients located on the same
local network as well as clients on the external, unprotected side. Communication can take place
across the public Internet or between clients on the local network.
Scenario 3
Protecting proxy and local clients - Proxy on a DMZ interface
The SIP session is between a client on the local, protected side of the D-Link Firewall and a
client which is on the external, unprotected side. The SIP proxy is located on the DMZ interface
and is physically separated from the local client network as well as the remote client network
and proxy network.
All the above scenarios will also deal with the situation where two clients in a session reside on the
same network.
These scenarios will now be examined in detail.
Scenario 1
Protecting local clients - Proxy located on the Internet
The scenario assumed is an office with VoIP users on a private internal network where the network's
topology will be hidden using NAT. This is illustrated below.
Tip
Make sure there are no preceding rules already in the IP rule set disallowing or
allowing the same kind of traffic.
219
Chapter 6. Security Mechanisms

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents