Table of Contents
Advertisement
3D-glasses_EN.book Page 7 Thursday, July 29, 2010 4:29 PM
•If the power of 3D Glasses is turned on when the battery residual quantity is
a little, the power light will blink 5 times. (When the battery died, the power
light does not blink or light up.)
•The battery for replacement must use the coin type lithium battery CR2032.
1
Loosen the screw using the
provided driver, and remove
the battery cover.
Battery cover
NOTE: Dispose of batteries in a designated disposal area and in accordance with
applicable laws and regulations.
•When cleaning the 3D Glasses, gently wipe with a dry, soft cloth.
– First remove any dirt or dust from the the 3D Glasses.
– Harsh rubbing or use of a dirty or stiff cloth will scratch the 3D Glasses.
•Do not use benzene, thinner, alcohol, water, or abrasive cleaners, which may
damage the 3D Glasses.
•When not using the 3D Glasses, put it in the provided glasses case and store
it avoiding high temperature and humidity.
•It is recommended to remove the battery from the 3D Glasses if the 3D
Glasses are not to be used for an extended period of time. This will prevent
the consumption of the battery and the leak of the battery liquid. Store the
removed battery in the plastic bag etc. not to short-circuit.
WARNING:
Do not leave the 3D Glasses, the battery or the accessories
within the reach of small children.
Inhaling or swallowing them may cause suffocation or lesions in the stomach
wall.
If swallowed, consult a doctor immediately.
Replacing the battery
2
Replace the battery, and
screw the battery cover.
Care and Storage
7
Put the display of "+"
to the upper side.
Battery
Battery cover
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
