Table of Contents
Advertisement
Messages and Signals
MEMORY IS FULL
MEMORY PRINTING
NO # STORED
OGM NOT RECORDED
ON HOOK DIAL
OUT OF PAPER
OVER HEAT
PAPER JAMMED
READY TO SEND
124
The memory is full. This may occur during fax
reception if too much data is received before the
pages can be printed out. If faxes have been
received to memory because printing is not possible
(an additional message will indicate the problem),
resolve the problem so that printing can continue
(see Substitue Reception to Memory in Chapter 4). If
you are attempting to transmit from memory, see
Sending Documents from Memory in Chapter 7.
The fax is preparing or printing out a document from
memory.
You have tried to dial or clear a Rapid Key or Speed
Dial number that hasn't been programmed (a full
number hasn't been assigned to it).
The reception mode cannot be set to A.M. because a
general outgoing message has not been recorded.
To record a general outgoing message, see
Recording an outgoing message in Chapter 2.
The SPEAKER key has been pressed and the fax is
waiting for you to dial. (To return to the date and time
display, press the SPEAKER key again.)
You are out of printing paper (or the paper release
plate is open). Load paper as described in Loading
Printing Paper in Chapter 1.
The print head has overheated. Operation may be
continued once it cools.
The printing paper is jammed. See the following
section, Clearing Paper Jams.
A document has been loaded and the fax is waiting
for transmission or copying instructions.
Advertisement
Table of Contents
