Electrolux Elite 4230X BP Instruction Manual

Hide thumbs Also See for Elite 4230X BP:

Advertisement

Electrolux Outdoor Products
Via Como 72
23868 Valmadrera (Lecco)
Phone +39 0341 203111 - Fax +39 0341 581671
www.electrolux.com/mcculloch - www.electrolux.com/partner
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Electrolux Outdoor Products manufacture products for a number of well known brands under various registered patents, designs and
trademarks in several countries.
© Electrolux Outdoor Products Italy
The Electrolux Group. The world's No. 1 choice
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million
Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold
each year to a value of approx. USD 14 billion in more than 150 countries around the world.
PN 249340 REV. 03 (05/04)
ITALIA

Advertisement

Table of Contents
loading

Summary of Contents for Electrolux Elite 4230X BP

  • Page 1 The Electrolux Group. The world’s No. 1 choice The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.
  • Page 2 2 Strokes Engine totally McCulloch sintetyc oil or Partner oil 50:1 40:1 22 3 2,5% 1 ltr 20 cm 1 ltr 25 cm...
  • Page 3 42cc-46cc 42/46/52cc 42/46/52cc 42/46/52cc 42/46/52cc 42/46/52cc 0,095" 197" 538249344 2,4 mm 5000 mm 3,0 mm STOP 538248960 52cc 538026134 9" 230 mm 538248960 538026135 10" 255 mm 538248960 538036711 9" 230 mm 538248960 538036713 10" 255 mm 538248960 9" 538040998 230 mm 538240936 538240553...
  • Page 4: General Description

    A. General Description 1) ENGINE 18) SAFETY POLE GUARD 2) SHAFT 19) STRING CUTTER BLADE 3) THROTTLE TRIGGER 20) NYLON STRING HEAD GUARD 4) REAR CONTROL GRIP EXTENSION 5) BLADE 21) BLADE GUARD 6) NYLON STRING HEAD 22) RING 7) STOP SWITCH 23) SHOULDER STRAPS 8) FUEL ENRICHMENT LEVER 24) SHOULDER STRAP BUCKLE...
  • Page 5 Danger of kickback. The blade is Minimum safety distance 15m. capable of amputating arms and 15 m legs. CAUTION! Danger of serious leg injuries. Emergency stop. Take scrupulous care to follow the instructions in the manual. CAUTION! The cutting parts and muffler may Maximum shaft speed.
  • Page 6 • possible contact with flying debris. can also help to protect you further from the risk Never use a brush cutter without its safety pole of noise and vibration. guard correctly in place. Only use blades or Avoid contact of the eyes and skin with any nylon string heads clearly marked with a oil or fuel.
  • Page 7 obstacles. Use the machine holding it to the right clean by removing any grass cuttings, leaves, of your body so that the exhaust fumes can excess oil to reduce the fire hazard. Engine escape freely without obstruction from your exhaust fumes can get very hot and may contain clothing.
  • Page 8: Fuel Mixture

    Shaft fastener the cutting device, or the grass itself, from flying up and striking the operator. 1 2 3 4 12 Safety pole guard Use the shaft fastener every time you start the 1 2 3 4 machine, fastening the connector to the supporting device.
  • Page 9 Never store the engine with fuel in the tank in a reach a fire, candle, burner or furnace pilot light, poorly ventilated place where the fumes water heater, dryer, etc. Never store excessive produced by the gasoline could propagate and quantities of fuel.
  • Page 10: Starting And Stopping The Engine

    Lower washer - e) Spacer - f) Rotating mower Saw tooth blades (24 - 80 tooth) have a gauge - g) Blade locking screw (length mm 34,5). central base diametre of 20mm and Assembly of sawtooth blade and blade guard therefore require the use of the appropriate size top flange to ensure a 2 3 4 10...
  • Page 11: Routine Maintenance

    H. Routine maintenance 1 2 3 4 7 9 10 cleaning of the parts inside the machine. This will reduce the possibility of unexpected problems After every use and will ensure the good performance and long In order to avoid overheating the motor, remove life of your machine.
  • Page 12: Environmental Information

    Drawing out the string I2. KICKBACK can occur when cutting is done During cutting, the nylon string wears naturally with the risk sector of the blade; we recommend causing an increase in the speed of the engine cutting with the rest of the blade. Take care that and a reduced cutting capacity.
  • Page 13: Declaration Of Conformity

    Valmadrera, Italy, comply with European Directive: 98/37/EEC (Machine Directive), 93/68/EEC (EEC Marking Directive) & 89/336/EEC (Electromagnetic Compatibility Directive), directive 2000/ 14/EEC (Enclosure V). Valmadrera, 15.12.03 Pino Todero (Technical Manager) Electrolux Outdoor Products Italy S.p.A. Via Como 72, 23868 Valmadrera (Lecco) ITALY O. Technical data Displacement (cm ) .

This manual is also suitable for:

Quattro 52 bp proTrimmerElite 4630x bp

Table of Contents