Table of Contents
Advertisement
■ Slave
With the SEF-54PZF , you can take photographs
with the flash unit separated from the camera that
is wirelessly in auto or manual mode.
Before photographing, confirm the following.
You can take photographs with the flash unit sepa-
rated from the camera that doesn't support the
wireless mode like the GX-1S or GX-1L in this
mode. Set the flash mode to A or M mode.
● Set the slave flash to SL2. (refer to page 50.)
48
Procedure
1
Confirm that the slave mode is set to SL2.
(Refer to page 50.)
2
Set the flash unit' s power switch to (WIRE-
LESS).
3
Press the wireless mode button (M/C/S) the
number of times required to display SLAVE on
the LCD panel.
4
Press the flash mode button (MODE) to set
the flash mode.
Advertisement
Table of Contents
