Table of Contents
Advertisement
CT 400 P installation instructions
Fitting the tepan plate
When lowering the tepan into the
cut-out, ensure that the cables do
not get trapped or damaged.
^ Feed the connection cable down
through the cut-out.
^ Carefully lower the tepan into the
cut-out. When doing this, make sure
that the Miele logo a is positioned
above the switching unit (see
illustration).
^ Connect the tepan plate to the mains
electricity supply (AC 230 V / 50 Hz).
^ Any of the sealing strip which
protrudes above the worktop should
be removed using a sharp knife.
26
- Quick Links:
- Built-In Tepan
- Mobile Tepan
Hide quick links:
Advertisement
Table of Contents
