Advertisement
3 | MIC Series 412TF Thermal Camera
Camera Module (thermal)
Lens
50 mm
Image sensor
Focal Plane Array (FPA), un-cooled Vanadium
Oxide microbolometer
30 Hz NTSC, 25 Hz PAL; US export license
required.
Picture elements
324(H) x 256(V)
Spatial resolution
0.760 mrad with 50 mm lens
Field of view
14°(H) x 11°(V) with 50 mm lens
Focus
Factory-set at infinity focus
Spectral response
7.5 to 13.5 μm
Thermal sensitivity
<85 mK at F1.6
Electronic zoom
2X
Features
White hot, black hot, and false color modes
Performance Range
Human 1.8 x 0.5 m
(5.9 x 1.6 ft)
Detection
780 m (2559 ft)
Recognition
200 m (656 ft)
Operational
E-flip
Yes, E-flip enables the optical camera to invert the
image
Manual flip
Yes
Presets
64 telemetry presets accurate to less than
0.1°utilising resolver technology (using FV protocol,
10 camera set-up presets to allow ANPR, color
correction etc.)
Preset tours
6 tours each with up to 32 presets
Sector titles
Yes (64 sectors) 20 characters per title
Preset titles
20 character caption for each of the 64 presets
Home position
Yes (preset 1 or tour)
Communication and Protocols
Communication
RS485 / RS422
Control protocol
Bosch or FV protocol cameras available;
additional protocols supported are Pelco D, Kalatel,
Panasonic, and VCL. These can be loaded using the
MIC-USB485CVTR signal converter and Cam-set
via a PC.
Biphase control requires a Biphase to RS485
converter (MIC-BP4, available separately) installed
in the MIC Series PSU to connect to Biphase
equipment.
Object 2.3 x 2.3 m
(7.5 x 7.5 ft)
2.2 km (2200 m)
(7218 ft)
590 m (1,936 ft)
Connectivity
Video
Single co-axial via composite cable (optical/
thermal cameras, user switchable)
Telemetry
Twisted pair; Simplex, half and full duplex
operation via composite cable
MIC Universal Camera
Supplied with each camera, Cam-set allows
Setup Software Utility
direct connection to a USB-equipped PC via
(Camset)
the MIC Series PSU over a full duplex or IP
network to provide access to all camera
functions and useful diagnostic tools
USB to RS485 signal
Allows MIC Series cameras to connect to a
converter
PC (supplied free with camera, or available
separately)
Power
Via composite cable
Alarms
Alarm inputs
1 tamper input (additional inputs possible
with optional alarm card in MIC Series PSU)
Alarm communication
Tamper switch (ground connection)
Mechanical
Drive unit
Brushless integral pan/tilt motor drive
Pan angle
360° continuous rotation
Pan speed
Up to 72° per second (variable)
Tilt angle
260°
Tilt speed
0.2° to 90° per second (variable)
Speed control
Closed loop electronics
Preset accuracy
±0.30 degrees (typical)
Proportional Pan/Tilt to
Yes
Zoom
Electrical
Input voltage (dual
18VAC, +/-10%, 50/60 Hz
source)
Input current
Camera: 2 A
Heater: 1 A
Environmental
Operating temperature
-40 °C to +50 °C (-40 °F to +122 °F)
Weatherproofing
IP68 (1m submersion for 24 hours)
Construction
Dimensions (W x H x D)
267 x 445 x 200 mm
(10.51 x 17.52 x 7.87 in.)
Weight
9.5 kg (20.94 lb)
(including 4-in. PCD base)
Viewing window
Tempered flat glass (optical) and
germanium covering (thermal)
Construction material
Machined aluminum
Advertisement
