Table of Contents
Advertisement
nt
g
he
on
BACKLIGHT
The SCB-3003 is designed so that it delivers a distinctive subject and background at
the same time, even when the subject is in backlight, by adopting a function of the
proprietary SV-V DSP chip.
1.
When the SETUP menu screen is displayed,
select 'BACKLIGHT' by using the Function
Setup button. so that the arrow indicates
'BACKLIGHT'.
2.
Select a desired mode using the Function
Setup button depending on the camera
purpose.
OFF : Not being used
BLC : Enables a user to select a desired area on a
picture and view that area more clearly.
-
LEVEL : Adjusts the brightness level of a
monitoring area.
-
TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
HLC (High Light Compensation) :
This function masks the strong light to minimize
white out due to over exposure and preserve much
of the on-screen details when the camera aims a
strong light source.
-
LEVEL : Adjusts the brightness level of a
monitoring area.
-
LIMIT : Enable to change the operating condition.
-
MASK COLOR/TONE : Change the
color / brightness of the masking area.
(Black, Red, Blue, Cyan, Magenta)
-
TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
MAIN SETUP
1. LENS
DC
2. EXPOSURE
3. WHITE BAL
ATW
4. BACKLIGHT
OFF
5. SSNR3
ON
BLC SETUP
1. LEVEL
MIDDLE
2. TOP
3. BOTTOM
4. LEFT
5. RIGHT
150
6. RETURN
HLC SETUP
1. LEVEL
MIDDLE
2. LIMIT
NIGHT ONLY
3. MASK COLOR
BLACK
4. MASK TONE
5. TOP
6. BOTTOM
105
7. LEFT
8. RIGHT
210
9. RETURN
English_27
25
90
70
5
10
10
Advertisement
Table of Contents
