Nokia ESB26 User Manual page 217

Gigabit ethernet switch
Table of Contents

Advertisement

17.
Command Syntax
device-name(config-vlan VLAN-NAME)#remove ports default PORT-LIST
config-dynamic
The config-dynamic command, in VLAN Configuration mode, changes the mode to
configuration mode of a specific dynamic VLAN to static mode. You can also use this
command in a specific VLAN Configuration mode. This command will switch the
Configuration mode to the new VLAN configuration mode.
The config-dynamic command allows entering the VLAN configuration mode of a specific
VLAN for dynamic GVRP VLAN by converting the dynamic GVRP VLAN to static VLAN.
Once entering the VLAN configuration mode of a specific VLAN, this VLAN becomes static
and gets the system name Dynamic_<vid> (e.g. Dynamic_2).
The VLAN's dynamic interfaces can be shown with the show vlan dynamic command and
the VLAN's static interfaces can be shown with the show vlan command.
To delete the converted VLAN, use the delete commands for the static VLANs (disabling the
GVRP won't erase the converted VLANs).
Command Syntax
device-name(config vlan)#config-dynamic <vlan-id>
Argument Description
vlan-id
Specifies the VLAN ID number, in the range <2-4094>.
Example
Configuring the dynamic GVRP VLAN 2:
device-name(config vlan)#config-dynamic 2
device-name(config-vlan Dynamic_2)#
management
The management command, in VLAN Configuration mode, provides access to the switch's
management on the specified VLANs. The no form of this command blocks access to the
switch's management on the specified VLANs.
By default, management of the switch is accessible on all VLANs.
Use the management command to limit switch management access to VLANs that you
specify by a list of VLAN ID numbers. You may include VLANs that have not been created
yet and VLANs that were dynamically learned by the GVRP.
Before applying the management command, verify that the following conditions are met:
You must be able to move your network management station to a switch port
assigned to the same VLAN as the management VLAN.
Connectivity through the network must exist from the network management
station to all switches involved in the management VLAN change.
MN700004 Rev 01
Virtual LANs (VLANs)
206

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents