Miele H 4844 BP Specification page 2

Chef series

Hide thumbs Also See for H 4844 BP:

Product and Cut-out Dimensions

H 4844 BP Chef Series Single 30" Oven – Classic Design DS 4045 Signature Handle

H 4844 BP Chef Series Single 30 Oven

H 4846 BP Chef Series Single 30" Oven – Europa Design DS 4042 Square Handle

Proud Undercounter Installation

Location Codes

A – Vent cut-out (min. 24" ² / 150 cm ²) possible at rear or platform of cabinet

(

B – Cut-out for power cord (min. 1" 2 / 3 cm2)

C – 6 ft. (1.8 m) flexible power cord consisting of 4 wires ready for connection

to a dedicated 3 pole, 4 wire grounded power supply:

208 V, 60 Hz, 30 A fuse rating

240 V, 60 Hz, 30 A fuse rating

Ensure that the power outlet is accessible after installation

The silver data plate is located along the front side of the oven with the door open.

Notes

The oven must be installed into cabinetry and be supported from underneath.

Miele appliances can be installed flush or proud. Discuss your installation requirements with your architect, designer

and installer. Cabinet depth for flush installation is 25" also the inside edges of the rough opening must be finished.

When installed under a cooktop regard the installation instructions and dimensions of the cooktop

All installations must be done in accordance with local codes.

Drawing is not to scale

Classic Design DS 4045 Signature Handle

) p

Page 2 of 2

Specification Sheets OJS 05252012