D-Link DSL-2750U User Manual page 70

Hide thumbs Also See for DSL-2750U:

Table of Contents

4.4.11.6 UPnP

Choose ADVANCED > Network Tools and click UPnP. The page shown in the

following figure appears.

In this page, you can configure universal plug and play (UPnP). The system

acts as a daemon after you enable UPnP.

UPnP is used for popular audio visual software. It allows automatic discovery of

your device in the network. If you are concerned about UPnP security, you can

disable it. Block ICMP ping should be enabled so that the device does not

respond to malicious Internet requests.

Click Apply to save the settings.

4.4.11.7 ADSL

Choose ADVANCED > Network Tools and click ADSL Settings. The page

shown in the following figure appears.

In this page, you can select the DSL modulation. Normally, you can keep the

factory default setting. The device negotiates the modulation mode with

DSLAM.

Click Apply to save the settings.

DSL-2750U User Manual

Table of Contents

Show Quick Links

Table of Contents