Table of Contents
Advertisement
4. Change the object type number on the operation
chart to the desired object type number.
Select "
CHG-TYPE" and press the SET key.
Then press the up and down arrow keys to change
the object type number.
After selecting a number, press the ESC key.
5. Move the cursor to "
using the up and down arrow keys and press the
SET key. The operation chart for the selected
object type will be displayed on the right side of
the screen.
Reference: To use a sample operation chart,
move the cursor to the sample
number desired and press the SET
key. (Ex.:
Note: If no measurement conditions are set, the
screen will not display any operation chart
when you select "
[2] How to edit an operation chart
1. While looking at an open operation chart, select the item you want to edit using the up and down
arrow keys. Press the TRG/BRT key, and move
the cursor to "EDIT" in the upper function menu.
Then, press the SET key.
SEL
OPERATION CHART"
)
OPERATION CHART."
TRG/BRT
SET
ESC
Setting and Operating Outlines
SET WIZARD
SCREEN SAVE DEL
[ SAMPLE ]
1CHG-TYPE
2STANDARD WIZARD
3OPERATION CHART
SET WIZARD
EXIT
[ SAMPLE ]
1
2
3
4
SET WIZARD
SCREEN EDIT SAVE
[ SAMPLE ]
1CHG-TYPE
2STANDARD WIZARD
3OPERATION CHART
6-9
COLOR F C1 BRT
Change using the up and
down arrow keys.
TYPE
00
Start
End
COLOR
F C1 BRT
TYPE00
Start
STEP1
PARALLEL+SERIAL+USB
STEP2
CAPTURE IMG/PARTIAL-IMG
STEP3
COLOR IMAGE CORRECT
STEP4
MEAS1/CAM1
STEP5
MEAS1/F/BIN-AREA
STEP6
MEAS1/WINDOW/MASK,1
STEP7
MEAS1/MEAS CND
STEP8
MEAS1/EVALUATION
STEP9 MEAS1/CALC
STEP10 MEAS1/OUT
STEP11 FINAL NUMERIC CALC
STEP12 FINAL OUTPUT COND
STEP13 SERIAL OUTPUT/ANY
STEP14 OPS MENU COND
STEP15 CALIBRATION/YES
STEP16 MOVE ALL WINDOW/YES
STEP17 TITLE/YES
End
COLOR F C1 BRT
TYPE00
Start
STEP1
PARALLEL+SERIAL+USB
STEP2
CAPTURE IMG/PARTIAL-IMG
STEP3
COLOR IMAGE CORRECT
STEP4
MEAS1/CAM1
STEP5
MEAS1/F/BIN-AREA
STEP6
MEAS1/WINDOW/MASK,1
STEP7
MEAS1/MEAS CND
STEP8
MEAS1/EVALUATION
STEP9 MEAS1/CALC
STEP10 MEAS1/OUT
STEP11 FINAL NUMERIC CALC
STEP12 FINAL OUTPUT COND
STEP13 SERIAL OUTPUT/ANY
STEP14 OPS MENU COND
STEP15 CALIBRATION/YES
STEP16 MOVE ALL WINDOW/YES
STEP17 TITLE/YES
End
6
Advertisement
Table of Contents
