Configuration Restrictions And Guidelines; Configuration Procedure - HP 6125G Configuration Manual
Acl and qos configuration guide
Hide thumbs
Also See for 6125G:
- Command reference manual (426 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
Configuration restrictions and guidelines
If a class that uses the AND operator has multiple if-match acl, if-match acl ipv6, if-match
•
customer-vlan-id or if-match service-vlan-id clauses, a packet that matches any of the clauses
matches the class.
To successfully execute the traffic behavior associated with a traffic class that uses the AND operator,
•
define only one if-match clause for any of the following match criteria and input only one value for
any of the following list arguments. To create multiple if-match clauses for these match criteria or
specify multiple values for the list arguments, specify the operator of the class as OR and use the
if-match command multiple times.
customer-dot1p 8021p-list
destination-mac mac-address
dscp dscp-list
ip-precedence ip-precedence-list
service-dot1p 8021p-list
source-mac mac-address
Configuration procedure
To define a class:
Step
Enter system view.
1.
2.
Create a class and
enter class view.
3.
Configure match
criteria.
match-criteria: Match criterion.
Table 2 The value range for the
Option
acl [ ipv6 ] { acl-number |
name acl-name }
any
Command
system-view
traffic classifier tcl-name
[ operator { and | or } ]
if-match match-criteria
match-criteria
argument
Description
Matches an ACL.
The acl-number argument ranges from 2000 to 3999 for an IPv4 ACL, 2000
to 3999 for an IPv6 ACL, and 4000 to 4999 for an Ethernet frame header
ACL.
The acl-name argument is a case-insensitive string of 1 to 63 characters, which
must start with an alphabetic letter from a to z (or A to Z), and to avoid
confusion, cannot be all.
Matches all packets.
19
Remarks
N/A
By default, the operator of a class is AND.
The operator of a class can be AND or OR:
•
AND—A packet is assigned to a class only when
the packet matches all the criteria in the class.
•
OR—A packet is assigned to a class if it matches
any of the criteria in the class.
N/A
Advertisement
Table of Contents
