Advertisement
DESCRIPTION AND OPERATION OF PANEL PARTS
CHILD PROOF MODE DISPLAY
•
Check this to see if the CHILD
PROOF mode is ON (lit) or
warning (flashing)
CHILD PROOF/PRESET
•
You can set/reset the CHILD
PROOF mode.
•
You can set the time until
washing finished.
DETERGENT GUIDE
•
Put the laundry in the washer basket, push the START
button, rotate the pulsator without water to detect the laundry
amount. Then it indicates the amount of detergent required.
Example
•
Indicates one measuring spoon of the concentrated
detergent is required.
(The value is 1.0 when water level is 42L.)
Caution
•
The detergent spoon size may vary from different manufactures
and the brands.
•
If there is water in the basket before starting, the water level is
set high without detecting the laundry amount.
•
When the pulsator moves without water, there may be sound
come from the clothes buttons. Don't worry about clothes
damages. If it is necessary, put delicate buttons inside of the
clothes to avoid damage.
•
You can turn off the buzzer sound.
With pressing
3
Copyright © Arabic Integrated Services 2006
AW-8450SBE(01-05)
PROCESS DISPLAY
•
Operating process is indicated by
flashing. Remaining process is
indicated by lightening.
CYCLE SELECTOR
•
You can select the cycle suitable
for the laundry.
PROCESS
•
Select either the WASH, RINSE,
or SPIN cycle as you desire.
Put 1 spoon of the
detergent.
If you wish to turn off the end buzzer sound
Press
3
All Rights Reserved
Auto-Set Mode
•
The water level is set linearly by adjusting to
the washing volume. If the water level is
assigned at the point with no particular
indication, then the nearest level lights up.
•
In this auto-set mode, the set water level
illuminates when water supply finishes.
•
By pressing the "START/HOLD" button while
water is in the wash basket, the highest
water level lights up.
•
By pressing the
water level can be obtained.
•
Illumination shifts to the direction where the
higher water level is indicated as the result
of pushing the
•
While using the "tub cleaning" program, the
water level will be automatically at High and
the
Standard Detergent Amount
Compound Detergents
Powder
20g
20mL
Water 30L
48L
Approx. 32g Approx. 32mL Approx. 64mL Approx. 64g
42L
Approx. 28g Approx. 28mL Approx. 56mL Approx. 56g
33L
Approx. 22g Approx. 22mL Approx. 44mL Approx. 44g
23L
Approx. 15g Approx. 15mL Approx. 31mL Approx. 31g
•
The detergent amount differs with the type of the detergent.
•
Too much detergent causes frothily or insufficient rinse.
•
The water level slightly differs according to the particular type of laundry.
•
With pressing "COURSE" pad, press to turn on the power
switch.
After buzzer beeps 3 times, the end buzzer disabled.
•
As you reset, set the same way.
∗
Once you set it, the washing machine will remember the
mode set, and no need to set each time.
13/6/06, 13:19
START/HOLD
•
Press this pad when you
want to start.
•
Press this pad when you
want to hold.
POWER SWITCH
•
Press this button to power
off/on.
•
Power is automatically
turned off about 15 seconds
after the end of operation, or
about 10 minutes later if the
operation is not on.
WATER LEVEL
Button Setting
button, a desired
button.
button cannot be used.
Powder soap
Liquid
Liquid Neutral Natural Fat/
Detergents
Oil
40mL
40g
Water 30L
Water 30L
Water 30L
- Quick Links:
- Description of Parts
Hide quick links:
Advertisement
