Network Setup
Live mode Cut In
Set this [ON] to allow interrupt of the Live mode by other users while the Live mode is active (sending image) by the
"Wireless Manager". For details, refer to "Wireless Manager" operating manual.
1
Select [Live mode Cut In] in [Network Setup] menu and press
2
Select [On] or [Off].
Control I/F Select
Set whether to control with RS-232C (serial) or LAN. When [LAN] is set, the slot power is turned on, and power
indicator is lit orange under the condition of power off with remote control (stand-by state), regardless of the [Slot
power] setting.
1
Select [Control I/F Select] in [Network Setup] menu and press
2
Select [RS-232C] or [LAN].
WEB Control
Select [On] to control the display from the web browser. When [On] is set, the slot power is turned on, and power
indicator is lit orange under the condition of power off with remote control (stand-by state), regardless of the [Slot
power] setting.
1
Select [WEB Control] in [Network Setup] menu and press
2
Select [On] or [Off].
Status
Displays the current network status.
Select [Status] in [Network Setup] menu and press
The Display information, settings of wired LAN and wireless LAN are displayed.
Reset
You can reset the network setting to the factory default of the Display.
1
Select [Reset] in [Network Setup] menu and press
Network Setup
Ok
2
Select [Ok] and press
It takes some time to restart network while the network settings are initialized.
During that time, "Network Setup" in the "Setup" menu is grayed out and cannot be set.
Reset
Cancel
.
button.
button.
button.
button.
button.
17