Scsi Bus Settings Submenu; Autoconfigure Scsi Device Submenu - NEC Express5800 320La User Manual
Hide thumbs
Also See for Express5800 320La:
- System configuration manual (102 pages) ,
- Installation notes (8 pages) ,
- Release note (18 pages)
Table of Contents
Advertisement
SCSI Bus Settings Submenu
Feature
Choices or Display Only
0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
SCSI Bus SCSI ID
10, 11, 12, 13, 14, 15
Enabled
SCSI Bus Reset
Disabled
SCSI Bus Reset
0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
Delay
10, 11, 12, 13, 14, 15
SCSI Bus
Auto
Termination
High only
Disabled
Enabled
Autoconfigure SCSI Device Submenu
When "Autoconfigure SCSI Device" is selected the screen for setting the
information on the device connected to the host adapter appears.
The parameters (choices) and their default settings are the same as those listed
in the table for "SCSI Device Settings."
Notes:
before changing the SCSI bus settings and SCSI IDs.
The default settings at shipment are identical for both SCSI
bus 0 and SCSI bus 1.
The following items can be changed by setting the Adapter
Configuration in "SCSI Device Setting" to Manual.
- Enable Device
- Enable LUNs
- Negotiate Wide
- Negotiate Sync
- Tagged Queuing
- Sync Offset
- Sync Period
- Exec Throttle
Description
Specify the SCSI bus ID value.
Value 7 is set for SCSI Bus 0 and
value 6 is set for SCSI Bus 1.
Make the reset valid or invalid for
SCSI buses.
Factory set. Do not change.
Set the termination resistance of
the SCSI bus.
Always check the SCSI ID of the target device
Your Setting
Configuring Your System 3-19
Advertisement
Table of Contents
Troubleshooting
