Before Using Oven Racks; Baki Ng Layer Cakes - LG LRE30451SW Owner's Manual & Cooking Manual
Hide thumbs
Also See for LRE30451SW:
- Service manual (74 pages) ,
- Owner's manual & cooking manual (34 pages) ,
- User's manual and cooking manual (34 pages)
Table of Contents
Advertisement
SETTING
BAKE
The BAKE pad controls normal baking. The oven can be
programmed
to bake at any temperature
from 17o °F to
55o°F. Default temperature
is 35o°F
(175°C).
To set the Bake Temperature
to 375°F:
1. Press BAKE. 350 ° will appear in
the display.
2. Press 3, 7, and 5. BAKE will flash.
3. Press START. The display will
show BAKE and the changing
temperature starting at 100°F.
llt!l!0 R 'r_\m' _0fli:
Place food in the oven after preheating if the recipe calls for
it. Preheating
is so important
for good results when baking
cakes, cookies, pastry, and breads. After the oven has
reached the desired temperature,
long beeps will sound
5 times and oven lamp will flash. This will take
approximately
lO-15 minutes.
.....................
Press CLEAR/OFF
to cancel the Bake feature at any time.
To change
the Bake
Temperature
while
cooking
(example
changing
from
375 ° to 425°F):
1. If the oven temperature needs to
be changed to 425°F, press BAKE
and 3500 will show in the display.
2. Press 4, 2, and 5.
3. Press START.
BAKI NG LAYER CAKES
Baking results will be better if baking pans are centered in
the oven as much as possible. If baking with more than one
pan, place the pans so each has at least 1"to 11/2,, of air space
around it.
If cooking on multiple racks,place the oven racks in positions
B and D (for 2 racks). Place in positions B, D, and F (for 3
racks). Place the cookware as shown in Fig. 1, 2.
Fig.1
Fig.2
Oven Racks
• The oven has 7 rack positions.
Ty
_a,
Po !_! _
Angel food cake, Frozen pies
B
Bundt or pound cakes
C
Biscuits, muffins, brownies, cookies,
D
cupcakes, layer cakes, pies
Casseroles
D
Turkey, roast, or ham
A
BEFORE USING OVEN RACKS
The oven has three racks (2 heavy rack, I split ra&). The racks
have stops to be placed correctly on the supports, those will stop
betbre coming completely out.
To remove
racks:
1. Pull the rack straight out until it stops.
2. Lift up the front of the rack and pull it out.
To replace
racks.
1. Place the end of the rack on the support.
2. Tilt the front end up and push the rack in.
- 16-
- Quick Links:
- Operation
- Setting Beeper Volume
Hide quick links:
Advertisement
Table of Contents
