Rs422 (Rs485) Communication - Panasonic GT01 User Manual
Gt series programmable display
Hide thumbs
Also See for GT01:
- Brochure & specs (20 pages) ,
- User manual (206 pages) ,
- Manual (136 pages)
Table of Contents
Advertisement
3.4.4 RS422 (RS485) Communication
There is no RS and CS (control lines).
-
Perform wiring and placement of the cable so that there is no impression of external noise on the cable
-
and no induction.
Use shielded wires for distribution cables. (Recommended cable: AIGT8175 (for Mitsubishi FX series)
-
When using shielded cable with crossover wiring for the RS485 transmission line, grounded one end.
-
"E" is used to set the terminal unit.
-
It conforms to CE marking. As conditions, the following wiring is required.
-
1. Fit a ferrite core to the cable. (For GT11 only)
(Recommended ferrite core: Seiwa Electric's E04SR170730A or equivalent)
2. Perform grounding of the cable shield.
3. Perform grounding of the GT.
GT01/GT02/GT12
GT21
Key Point:
The CE marking standards that the GT series conforms to
European EMC directive 2004/108/EC
European EMC standards For GT01, GT11, GT21 (EN61000-6-4 and EN61000-6-2)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
GT11
GT05/GT32/GT32-E
For GT02, GT12, GT05, GT32, GT32-E (EN61131-2)
3-17
Advertisement
Table of Contents
Troubleshooting
