Table of Contents
Advertisement
EBU12871
Rear shock absorber adjustment
The spring preload can be adjusted to suit the
rider's weight and riding conditions.
Adjust the spring preload as follows.
1. Loosen the locknut.
2. To increase the spring preload, turn the
adjusting nut in direction a. To decrease
the spring preload, turn the adjusting nut in
direction b.
b
1. Adjusting nut
a
q
w
2. Locknut
cC
Never attempt to turn the adjusting nut
beyond the maximum or minimum setting.
NOTE:
A special wrench can be obtained at a Yamaha
dealer to make this adjustment.
3. The length of the spring changes 1 mm
(0.04 in) per turn of the adjusting nut.
Measurement A:
Installed length:
Minimum (hard): 222 mm (8.7 in)
Standard: 230 mm (9.1 in)
Maximum (soft): 234 mm (9.2 in)
4-15
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
