Table of Contents
Advertisement
EMERGENCY EJECT
The following procedure is intended only as a last resort when
pressing the eject button fails to open the CD tray.
1. Turn CD-ROM drive power OFF.
2. Insert a solid bar (i.e. large paper clip*) into Emergency Eject hole
and push in as shown in the picture below.
3. CD tray will open/eject.
This procedure cannot be repeated without cycling the CD-ROM's
power. After the media is removed and the loading tray is closed,
the tray will not reopen without first turning the power ON/OFF.
* Use a bar that is less than 1.5 mm in diameter. Do not insert more
than 50mm in depth. Inserting more than 50mm may damage the
CD-ROM drive.
CAUTION!
Inserting Bar to Eject CD Tray
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive
21
Hide quick links:
Advertisement
Table of Contents
