Adjusting The Lens 3-Axis Angle - D-Link DCS 6513 User Manual

Full hd wdr day & night outdoor dome network camera

Hide thumbs Also See for DCS 6513:

Table of Contents

Section 2: Assembly and Installation

Adjusting the lens 3-axis angle

Adjust the Viewing Angle of the 3-axis

Mechanism

Turn the lens module left and right until the desired

position is achieved. Tighten the pan screw once

completed.

Loosen the tilt screws on both sides of the camera,

and turn the lens module up and down until the

desired position is achieved; tighten the tilt screws

once completed.

Turn the lens to adjust the IP camera's image until the

desired orientation is achieved, tighten the image

adjustment screw once completed.

D-Link DCS-6513 User Manual

Table of Contents

6513