2. PRINTER SETUP
2.8 Turning the Printer
ON/OFF
2.8.1 Turning ON the Printer
CAUTION!
Use the power switch to turn the
printer On/Off. Plugging or
unplugging the power cord to turn
the printer On/Off may cause fire,
an electric shock, or damage to
the printer.
NOTE:
If an error message appears in the
display instead of the ON LINE
message or the ERROR LED lamp is
illuminated, go to Chapter 5.1, Error
Messages.
2.8.2 Turning OFF the Printer
CAUTION!
• Do not turn off the printer power
while the media is being printed
as this may cause a paper jam
or damage to the printer.
• Do not turn off the printer power
while the ON LINE light is
blinking as this may cause
damage to your computer.
When the printer is connected to your host computer it is good practice to
turn the printer ON before turning on your host computer and turn OFF
your host computer before turning off the printer.
1. To turn ON the printer power, press the power switch as shown in the
diagram below. Note that ( ) is the power ON side of the switch.
2. Check that the ON LINE message appears in the LCD Message
Display and that the ON LINE and POWER LED lights are
illuminated.
1. Before turning off the printer power switch verify that the ON LINE
message appears in the LCD Message Display and that the ON LINE
LED light is on and is not flashing.
2. To turn OFF the printer power press the power switch as shown in the
diagram below. Note that ( ) is the power OFF side of the switch.
E2-13
ENGLISH VERSION EO1-33055
2.8 Turning the Printer ON/OFF
Power Switch
Power Switch