Page 2
1. No part of this manual may be reproduced in any form with the expressed written permission of SANYO. 2. The contents of this manual are subject to change without notice. 3. Please contact SANYO if any point in this manual is unclear or if there are any inaccuracies. SANYO Electric Co., Ltd.
PRECAUTIONS FOR CONTENTS SAFE OPERATION PRECAUTIONS FOR SAFE OPERATION P. 1 CAUTIOINS FOR USAGE It is imperative that the user complies with this manual as it NAME AND FUNCTION OF PARTS P. 6 contains important safety advice. BEFORE COMMENCING OPERATION Items and procedures are described so that AUTOMATIC TEMPERATURE RECORDER P.10 you can use this unit correctly and safely.
Page 4
PRECAUTIONS FOR SAFE OPERATION ~WARNING Do not use the unit outdoors. Current Never ground the unit through a gas pipe, leakage or electric shOck may result if the unit water main, telephone line or lightening rod. is exposed to rainwater. Such grounding may cause electric shock in the case of an incomplete circuit.
Page 5
PRECAUTIONS FOR SAFE OPERATION ~WARNING Never disassemble, repair, or modify the unit If the unit is to be stored unused in an yourself. Any such work carried out by an unsupervised area for an extended period unauthorized person may result in fire or injury ensure that children do not have access and due to a malfunction.
Page 6
PRECAUTIONS FOR SAFE OPERATION ~CAUTION Always hold the handle when closing the door. Always disconnect the power supply plug This will prevent the likelihood of a trapped before moving the unit during transit. Take finger. care not to damage the power cord. damaged cord may cause electric shock or fire.
CAUTIONS FOR USAGE ® G) If the unit is unplugged or the power to the unit is For some time after the unit has been started, or interrupted, do not restart the unit for at least 5 minutes. when the ambient temperature is fairly high, the cabinet This protects the compressor.
NAME AND FUNCTION OF PARTS ii~r ..""''' IIIII Drawer ." -® _ .. _. _ _ -_._ .• _ _ .• --<. "- 1-,@ r-;c- MPR-311DR(H) MPR-311 D(H) ® @Caster ([) Door For moving of the unit. At the time of installation, use Consists of double pair glass with heat ray reflection the height adjusting screw to level the unit.
Page 9
NAME AND FUNCTION OF PARTS Control panel ® \,0 " 0" "" DEFROST ~" " _:.All .. TeMP. CONTROL UGHT MPR·311(H) ® ®@@ 0" "~ w,'m. " DEFROST UGHT lEMP. CONTROL lEMPERATIJRE MPR·311D(H), MPR·311DR(H) Set button (PUSH SET) Buzzer switch (BUZZER) The set temperature is displayed while this button is By sliding this switch to OFF position, the buzzer can pressed.
BEFORE COMMENCING OPERATION Installation site To operate this unit property and to obtain maximum performance, install the unit in a location with the following conditions. <D A location not subjected to direct sunlight location not prone to high humidity Installation in a location subjected to direct sunlight may lead·...
Page 11
BEFORE COMMENCING OPERATION "' Installation <D @Grounding Remove the packaging materials and tapes Remove all transportation packaging materials and tapes. Open the doors and ventilate the unit. If the &WARNING outside panels are dirty, clean them with a mild . . Use an outlet with ground to prevent detergent and rinse with water.
AUTOMATIC TEMPERATUER RECORDER Automatic temperature recorder (optional) To record the chamber temperature, an optional automatic temperature recorder is available. Please consult with our sales department or agency for recorder installation. The available recorder model is MTR-0620LH. Moreover, a mounting kit (MDF-53RO(H)) is also necessary for MPR-311 (H).
START-UP OF UNIT The following procedure should be adhered to for initial start-up and continuous operation. <D Connect unit to dedicated power supply. Do not put @ Check that the chamber temperature has reached to any product in the unit at this time. the desired temperature.
OPERATING INSTRUCTIONS Temperature set Set up of chamber tern perature Table 1 and 2 show the basic operation method. Follow the key operation sequence indicated in the table. example in the table is based on the assumption that the chamber temperature set at 1 GOC. The unit is set at the factory to obtain the proper temperature (5°C) automatically.
Page 15
OPERATING INSTRUCTIONS Alarm, Safety function and Self diagnostic function This unit has the alarm and safety functions shown in Table 3 and Table 4, and also a self diagnostic function. Alarm and safety functions (MPR-311 H)) Table 3 Situation Indication Buzzer Safety operation Alarm or safety...
MAINTENANCE &WARNING . . Disconnect Always disconnect the power ' " Ensure not inhale consume prior to any repair or medication or aerosols from around the unit a supply to the unit unit in order to prevent . the time of maintenance. These may be maintenance of the harmful to your health.
TROUBLE SHOOTING If the unit malfunctions, check out the following before calling for service. If nothing operates even when switched on the unit for several hours. Is unit connected to the power supply? Is there a power failure? When unit does not get cold enough Is the fuse blown.or the circuit breaker inactivated? 1) Is air exhaust vent blocked up with containers? Was a large amount of warm product put in the...
& CAUTION Please fill in this form before servicing. Hand over this form to the service engineer to keep for his and your safety. Safety check sheet 1. Refrigerator contents: DYes Risk of infection: DYes Risk of toxicity: DYes Risk from radioactive sources: DYes (List all potentially hazardous materials that have been stored in this unit.) Notes:...
Page 20
" "-j SANYO Electric Co., Ltd. Refrigerating Products Division 1-1-1, Sakata Oizumi-Machi, Ora-Gun, Gunma 370-0596 Japan 7FB6P10124000 Printed in Japan...