Kenmore  Three-Speed Triple Dispenser Automatic Washers Owner's Manual & Installation Instructions
Kenmore  Three-Speed Triple Dispenser Automatic Washers Owner's Manual & Installation Instructions

Kenmore Three-Speed Triple Dispenser Automatic Washers Owner's Manual & Installation Instructions

Hide thumbs Also See for Kenmore Three-Speed Triple Dispenser Automatic Washers:

Advertisement

Owner's Manual and
Installation Instructions
Three-Speed
Triple Dispenser
®
AUTOMATIC WASHERS
IMPORTANT:
Read and follow all safety
and operating instructions
before first use of this product.
Your washer may look different
from the washer shown.
Sears, Roebuck and Co,, Hoffman Estates, IL 60179 U,S.A.
www.sears.com
Sears Canada Inc., Toronto,
Ontario, Canada MSB 2B8
www,sears.ca
3953633A
PRINTED IN U.S.A.
6199

Advertisement

Table of Contents
loading

Summary of Contents for Kenmore Kenmore Three-Speed Triple Dispenser Automatic Washers

  • Page 1 Your washer may look different from the washer shown. Read and follow all safety and operating instructions before first use of this product. Sears, Roebuck and Co,, Hoffman Estates, IL 60179 U,S.A. www.sears.com Sears Canada Inc., Toronto, Ontario, Canada MSB 2B8 www,sears.ca 3953633A PRINTED IN U.S.A.
  • Page 2: Troubleshooting

    For more information about the care Model No. and operation of Kenmore appliances call your nearest Sears store, You will need the complete model and serial numbers when requesting information. Serial No. Your washer's model and serial numbers are located on the Model and Serial Number Plate.
  • Page 3 Sears will repair workmanship. After the first year, you or replace any of its mechanical or will be charged for labor.
  • Page 4 Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others.
  • Page 5: Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electric shock, or injury to persons when using your washer, follow basic precautions, including the following: • Read all instructions before using • Do not allow children to play on or the washer.
  • Page 6: Installation

    INSTALLATION OVERVIEW For a complete list of tools and parts needed, see pages 7-9. A. SELECT LOCATION FOR YOUR WASHER (pgs. 11-13) Recessed Area/ Laundry Tub Drain System (p, 12) Closet Installation Instructions (p. 11) Standpipe Drain System (p, 13) Floor Drain System (p.
  • Page 7 B, REMOVE SHIPPING STRAP (p. 14) Tools Needed: Scissors Flashlight (optional depending on installation) C, CONNECT DRAIN HOSE (pgs, 15-16) _WIST Tools Needed: PaNs Needed: Pliers that open to 1 9/IGin (3.95 cm) 1 yellow, single-wire 1 silver, double- hose clamp (top of Flashlight (optional wire hose clamp drain hose)
  • Page 8 D. CONNECT INLET HOSES TO WASHER (pg. 16-17) Tools Needed: Parts Needed: 2 water inlet hoses Pliers that open to 1_, in (3.95 cm) Flashlight (optionai depending on installation) 4 fiat water inlet hose washers E. CONNECT INLET HOSES TO WATER FAUCETS (pg. 17) Tools Needed: Parts Needed: 2 water inlet hoses...
  • Page 9: Level Washer

    F, SECURE DRAIN HOSE (p. 18) Tools Needed: Parts Needed: Shipping strap with fastener Flashlight (optional depending on installation) G. LEVEL WASHER(p. Tools Needed: Parts Needed: 9/16in (1.43 cm) open-end wrench 2 front leveling legs with nuts (supplied with washer) Wood block Flashlight (optional depending on installation)
  • Page 10: Electrical Requirements

    • For a grounded, cord- connected washer: Selecting the proper location for your GROUNDING INSTRUCTIONS washer will improve its performance and minimize concerns like washer This washer must be grounded. In the walk or noise. event of malfunction or breakdown, grounding will reduce the risk of electri- ELECTRICAL REQUIREMENTS...
  • Page 11 A. SELECT LOCATION FOR YOUR WASHER - RECESSED AREA] CLOSET INSTALLATION INSTRUCTIONS This washer may be installed in a recessed area or closet. 48 in _ (310 cm _) - minimum ventilation 19 in area 24 in 2 (155 cm _) _ minimum ventilation area...
  • Page 12 LAUNDRY TUB DRAIN SYSTEM Do not store or operate washer at or below 32°F (0°C) (some water may Check location where washer will be remain in washer), See page 36 for installed. This washer can be installed winterizing information. using one of three systems: Proper installation is your responsibility.
  • Page 13 Siphon break, Part No. 285320; additional drain hose, Part No. 3357090; and Connector Kit, Part No. 285442 Parts listed are available from your local Sears store or Sears Service Center. In the United States, call 1-800-366-PART (1-800-366-7278). in Canada, call 1-877-533-6937.
  • Page 14: Remove Shipping Strap

    B. REMOVE SHIPPING STRAP STEP 2. Pull firmly to remove the end of the shipping strap that remains pinned to the back of the washer, This .irloiiu0J_,_,, :I_ 1[_ _I-, will release the rear self-leveling legs. Removing the shipping strap is necessary for smooth operation.
  • Page 15: Connect Drain Hose

    Hose kit, Part No, 285442 A problem with lint clogging your drain Drain protector, Part No. 367031 Parts listed are available from your local Sears store or Sears Service Center. In the United States, call 1-800-366-PART (1-800-366-7278). In Canada, call 1-877-533-6937.
  • Page 16 D. CONNECTINLETHOSES For standpipe or laundry tub drain TO WASHER systems: STEP 2. Open yellow, single-wire clamp with pliers and slide over hooked end of drain hose to secure the rubber and Proper connection of your inlet corrugated sections together. hoses will allow hot and cold water to enter your washer properly.
  • Page 17 6 ft (1,8 m), Part No. 76314 10 ft (3.0 m), Part No. 350008 Parts listed are available from your local Sears store or Sears Service Center. In the United States, call 1-800-366-PART (1-800-366-7278). In Canada, call 1-877-533-6937.
  • Page 18: Secure Drain Hose

    F. SECURE DRAIN HOSE If the water faucets and drain standpipe are recessed, put hooked end of drain hose in standpipe. Tightly wrap the shipping strap around the drain hose and water inlet hoses (not the handles Securing the drain hose properly will or stems), Push fastener into the protect your floors from damage due...
  • Page 19 STEP 5. Move washer to its final G. LEVEL WASHER location. STEP 6. Tilt washer forward until rear of washer is at least 3 in (7.6 cm) off Leveling your washer properly pre- floor. You may hear the self-adjusting vents excessive noise and vibration. rear legs click into place.
  • Page 20: Final Steps

    REVIEW INSTALLATION Take a few minutes to complete this checklist. It will help assure you that you have a proper installation and increase your satisfaction with your Kenmore washer, Check that: Check electrical requirements. Be sure you have correct electrical •...
  • Page 21: Lid Instructions

    LID INSTRUCTIONS _[seJa_IeJ_a ;I:_ n[_ _d These instructions are found under the lid of your washer. To get the maximum cleaning and fabric care from your washer, please read and follow these instructions, POWDER or LIQUID DETERGENT Dissolves powder or liquid detergents before applying to load.
  • Page 22: Select Cycle

    1. SELECT & ADJUST ..Make the selections for these washer controls: • WATER LEVEL Adjust to load size. • WASH/RINSE TEMP ..Adjust to type of fabric and soil Use AUTO TEMP selections for best wash performance. • RINSE OPTIONS ... Select to add a second rinse automatically.
  • Page 23 It's best to wash stains as soon as possible. Blood detergent for 30 minutes. Rinse. Rub detergent Rinse immediately or soak in cold water with into any remaining stains. Rinse thoroughly. stain remover. Rinse. Wash. If stain remains, _ Chocolate, Sponge immediately or apply a prewash...
  • Page 24: Stopping/Restarting Your Washer

    STARTING YOUR WASHER STEP 8. Set SPEEDS _) Control according to the type of fabric in the STEP 1. Place a load of sorted clothes load (see page 26). in the washer. Add measured detergent directly into dispenser (details on page 31). STEP 9.
  • Page 25: Water Level Control

    WATER LEVEL CONTROL Washers with 4-position or 5-position Water Level Control: • To change to a higher water level setting after the washer has started to agitate, turn the knob to the desired This control gives you the flexibility new setting. save water when washing small loads.
  • Page 26 AUTOMATIC TEMPERATURE The wash action mirrors the way you would treat hand washable garments in CONTROL (ATC) a sink. It does this by repeating periods of extra-slow speed agitation and soaking. Slow spin speeds help reduce wrinkling. Do not use this setting for large items like blankets.
  • Page 27: Permanent Press

    SETTING YOUR CYCLE SELECTOR (TIMER) CONTROL Use this control to choose the agitation time and to start the washer. • For heavy soil and sturdy fabrics, use more time, • For light soil and delicate fabrics, use less time. PERMANENT PRESS :FJtlt' r AUTO PREWASH The PERMANENT PRESS II cycle...
  • Page 28 CYCLE/OPTIONS DESCRIPTIONS You may add options to your wash cycle. The chart below shows you the proper set_ tings for your Cycle Selector Control (Timer) and RINSE OPTIONS Control. The Cycle Selector Control needs to be set where you want the cycle to start and the RINSE OPTIONS Control needs to be set where you want the cycle to stop.
  • Page 29: Understanding What Happens In Each Cycle

    UNDERSTANDING WHAT HAPPENS IN EACH CYCLE AUTO PREWASH ULTRA CLEAN PERMANENT PRESS selected level selected level selected level Fill to Fill to Fill to Wash Wash Wash selected time selected time selected time no spin Drain no spin Drain - Partial Drain - Pause...
  • Page 30: Self-Cleaning

    SELF-CLEANING LINT FILTER TOTAL CARE AGITATOR Lint is filtered from the load Kenmore's exclusive TOTAL CARE automatically - there's no messy agitator has triple action agitation cleanup. give you the most flexible fabric care for even your largest loads. Your washer features a self-cleaning The TOTAL CARE agitator moves in filter that traps lint from the water while...
  • Page 31 USING YOUR TRIPLE DISPENSER UNDERSTANDING NORMAL WASHER SOUNDS Your new washer may make sounds that your old one didn't. Because the The triple dispenser makes your sounds are unfamiliar, you may be washer truly automatic by making it concerned about them, unnecessary for you to return to the The following describes some of the washer during the cycle to put in...
  • Page 32: Using The Liquid Chlorine Bleach Dispenser

    USING THE LIQUID CHLORINE • Do not let bleach splash, drip, or run BLEACH DISPENSER down into washer basket Undiluted bleach will damage any fabric it touches • Start the washer. Bleach will be dispensed automatically after the detergent has had time to work. The liquid chlorine bleach dispenser automatically dispenses bleach at the...
  • Page 33: Using The Liquid Fabric Softener Dispenser

    USING THE LIQUID FABRIC SOFTENER DISPENSER After loading the washer, measure and add the recommended amount of fabric softener into the dispenser. Follow manufacturer's directions. Liquid fabric softenerdispenser If cleaning of the liquid fabric softener dispenser is required: Scrub with a brush using a liquid •...
  • Page 34: Preparing Clothes For Washing

    PREPARING CLOTHES SORTING FOR WASHING • Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together. Separate lint givers (towels, chenille) from lint takers (cordu- roy, synthetics, permanent press). When Follow these recommendations possible, turn lint givers inside out. to help you prolong the life of •...
  • Page 35: Loading Suggestions

    LOADING LOADING SUGGESTIONS For these suggested full-sized Ioads_ set the WATER LEVEL Selector to the highest water level setting. Proper loading of your washer con- tributes to proper cleaning and fabric King Size Capacity Washers care and reduces machine noise, Heavy Work Clothes Towels...
  • Page 36: Cleaning Your Washer

    CLEANING YOUR WASHER WINTER STORAGE OR MOVING CARE Proper care of your washer can extend its life. This section explains how to care Install and store your washer where it will not freeze. Because some water for your washer properly and safely. may stay in the hoses and pump, Exterior freezing can damage your washer.
  • Page 37 Most laundering problems are easily solved if you understand the cause. Check these lists for common laundry and washer problems. If you need further assistance, see service and assistance information on the back page. Problem Possible Cause Solution Washer Leaks Household plumbing is leaking.
  • Page 38 Problem Possible Cause Solution Won't Drain/ Low voltage or using Check electrical source or calI Won't Spin/ an extension cord. electrician. Do net use extension Wet Loads cords. (cont,) Cold rinses. Cold rinses leave loads wetter than warm rinses. This is normal. Continues Drain hose is less than Raise the drain hose...
  • Page 39 Problem Possible Cause Solution Machine Power cord not plugged in. PIug in power cord. Stops No power at plug. Check electrical source or call electrician. Fuse blown or circuit Replace fuse or reset circuit breaker. breaker open. If problem continues, call electrician. Using an extension cord, Do not use extension cords.
  • Page 40 Problem Possible Cause Solution Tearing Overloading. Improper Loads should move freely during use of washer, wash. Wash smaller loads or increase water level Improper use of chlorine Do not pour chlorine bleach directly bleach. Undiluted bleach on Ioad. Wipe up bleach spills. will damage fabrics.
  • Page 41 We Service What We Sell service at today's prices. "We Service What We Sell" is our • Eliminates repair bills resulting from assurance you can depend on Sears normal use. for service. Your Kenmore appliance has • Allows for as many service calls as added value when you consider that required.
  • Page 43 (1-800-366-7278) www.seam.comlpartsdlrect Para ordenar plezas con entrega a domlclllo - 1-800-659-7084 For the location of a Sears Service Center in your area: Call 24 hours a day, 7 days a week 1-800-488-1222 To purchase or inquire about a Sears Maintenance Agreement: Call 7 a.m.

Table of Contents