Overview Of Installation Steps - Bosch MIC612 Installation Manual
Hide thumbs
Also See for MIC612:
- Operation manual (94 pages) ,
- Installation manual (76 pages) ,
- Brochure & specs (9 pages)
Table of Contents
Advertisement
18
en | Installation
Example 2: Configuration with RS-485 protocol connection
Figure 4.2 MIC612 connected to a MIC power supply, which is connected to a head-end control system by
RS-485.
Number Description
1
2
3
4
4.2
Overview of Installation Steps
Follow these steps in sequence to install the MIC612 camera.
Note: Depending on your desired mounting position and location, as well as your chosen
accessories, you may not need to complete every step.
1.
2.
3.
4.
5.
6.
F.01U.249.416 | 2.0 | 2012.09
Biphase connection between MIC power supply and head-end control system
Video connection between MIC power supply and head-end control system
Shielded composite cable between MIC camera and MIC power supply
Head-end control system (with Divar 400 or 600 or similar) with appropriate links
Mount the camera. See Section 4.3 Mounting the Camera, page 19.
Install the power supply unit (PSU). See Section 4.4.4 Installation Instructions, page 23.
Make the necessary connections for power, telemetry, and video. See
Section 4.4.4 Installation Instructions, page 23.
Connect the camera to the computer. See Section 5 Getting Started.
Configure the camera for inverted operation (for cameras mounted in inverted
position). See Section 5.6 Configuring the Camera for Inverted Operation, page 36.
Fit the optional sunshield. See Section 4.5 Fitting the Optional Sunshield (MIC612),
page 29.
Installation Manual
MIC612 Thermal Camera
Bosch Security Systems, Inc.
Advertisement
Table of Contents
