Replacing The System Board - Dell Inspiron 4100 Service Manual
Hide thumbs
Also See for Inspiron 4100:
- Manual (160 pages) ,
- Solution manual (146 pages) ,
- User manual (139 pages)
Table of Contents
Advertisement
1 fan guard
2 M2.5 x 5-mm screws (9)
10. Turn the computer over and remove the M2.5 x 5-mm screw, which is labeled "circle B" with an arrow on the front center of the system board by the
battery connector.
battery connector.
1 M2.5 x. 5-mm screw (1)
11. Remove the
speakers
from the bottom case.
12. Pull the right side of the bottom case, next to the external headphone and microphone connectors, away from the system board as you simultaneously
lift the front of the system board out and away from the bottom case.
Replacing the System Board
1. Install the
microprocessor
on the replacement system board.
2. Connect the right and left
speakers
3. Install the replacement system board:
a. Insert the external microphone and headphone connectors through the bottom case.
b. Replace the six M2.5 x 5-mm screws, starting on the right side of the bottom case.
c. Replace the fan guard, inserting the tab into the bottom case, and replace the three M2.5 x 5-mm screws. Replacing the screw opposite the tab
first makes it easier to insert and replace the other two screws.
4. Replace the modem, the speaker assemblies, and the microprocessor thermal cooling assembly that you removed from the old system board.
HINT:
Be sure to route cables so that they will not be crimped or pinched when the complete assembly is put back together.
to the replacement system board.
- Quick Links:
- Video Connector
Hide quick links:
Advertisement
Table of Contents
