Ink Menu - Canon 3807B007 User Manual
Large format printer
Hide thumbs
Also See for 3807B007:
- Basic manual (52 pages) ,
- Setup manual (12 pages) ,
- Basic manual (48 pages)
Table of Contents
Advertisement
Setting Item
Paper Details
(The type of pa-
per is displayed
here.)
( *1
Paper Details
Keep Paper Type
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Types of
Paper.")
→P.712
trol Panel ) are updated when you install the printer driver from the User Software CD-ROM or if you update
paper information by using the Media Configuration Tool. (See Media Configuration Tool
Configuration Tool
Ink Menu
Rep. Ink Tank
iPF6300
Vac-
uumStrngth
)
→P.839
Scan Wait
Time
Roll Drying-
Time
NearEnd
RollMrgn
NearEnd Sht
Mrgn
Bordless Mar-
gin
Manual Feed
Return De-
faults
The types of paper indicated in the printer driver and related software (as well as on the Con-
.)
→P.669
Setting Item
Description, Instructions
Specify the level of suction that holds paper against the Plat-
en. (See "Adjusting the Vacuum Strength (Vac-
uumStrngth).")
→P.780
Specify the time to wait for the ink to dry between each scan
in bidirectional printing, in consideration of how quickly the
ink dries. Note that printing will take longer if you specify a
wait time.
Specify the time to wait for the ink to dry for each sheet.
Specify the minimum margin at the leading edge of roll pa-
per to ensure better printing quality at the leading edge.
Note that if you choose 3mm, it may lower the printing
quality at the leading edge and affect feeding accuracy. The
printed surface may be scratched, and ink may adhere to the
leading edge. It may also cause the Platen to become soiled.
Specify a margin at the leading edge of sheets to ensure bet-
ter printing quality at the leading edge.
Note that if you choose 3mm, it may lower the printing
quality at the leading edge and affect feeding accuracy. The
printed surface may be scratched, and ink may adhere to the
leading edge.
Adjust the margin during borderless printing.
Choose Automatic to have the printer automatically detect
the paper width and configure the margin settings for bor-
derless printing. If margins are mistakenly created when Au-
tomatic is selected, choose Fixed. In this case, the paper
width is not detected automatically, and the document is
printed without borders, using the margin settings required
by the printer.
Select the Paper Feed Slot to use when printing on sheets.
Normally, select Top. When printing on heavyweight paper
such as POP Board, select Front.
Choose OK to restore Paper Details to the default values.
Print the paper settings as specified in Paper Details.
Select On when printing on a particular type of paper regu-
larly. (See "Changing the Type of Paper.")
Description, Instructions
Replace the Ink Tank at this point. Follow the instructions
displayed to complete the required procedure. (See "Re-
placing Ink Tanks.")
→P.900
Printer Parts
>
Control Panel
→P.725
or Media
→P.439
Menu Settings
>
8
839
Advertisement
Chapters
Table of Contents
Troubleshooting
