Hearing Safety Listen at a moderate volume. ● Using headphones at a high volume can impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss.
Page 3
Norge Important notes for users in the U.K. Typeskilt finnes på apparatens bakside. Mains plug Observer: Nettbryteren er sekundert innkoplet. Den innebygde This apparatus is fitted with an approved 13- netdelen er derfor ikke frakoplet Amp plug.To change a fuse in this type of nettet så...
Page 4
This product contains Linux 2.4.27-vrsl, that is made available under the GNU LGPL license version 2.1 (hereafter called “the Library”). Philips Electronics Hong Kong Ltd. hereby offers to deliver or make available, upon request, for a charge no more than the cost of physically...
Contents 6. HD 1. General information 6.1 Playing Harddisk (HD) __________ 23 1.1 About WAS7000 _______________ 7 1.2 Supplied accessories _____________ 7 6.2 Selecting and searching ________24-25 1.3 Philips on-line support ____________ 8 6.2.1 Selecting a different option 6.2.2 Searching by key words ________ 1.4 Environmental information...
Page 6
Contents 9. UPnP (Universal Plug and Play) 9.1 About UPnP _________________ 32 9.1.1 About the UPnP-enabled device 9.2 Connecting to the UPnP device __ 32 9.3 UPnP playback ________________ 32 9.3.1 Playing music from the UPnP device 10. Sleep _______________________ 33 11.Alarm 11.1 Setting alarm _________________ 34 11.1.1 Setting alarm time...
1. General information 1.1 About WAS7000 1.2 Supplied accessories Up to 5 WAS7000 Stations can be – Remote control with 2 x AA batterys connected to a WAC7000 Center. – 1 x FM wire antenna – 1 x Ethernet cable You can centrally store up to 1500 audio –...
● Interactive troubleshooting As it is possible for you to upgrade your product, we recommend that you register your product on www.club.philips.com so that we can inform you as soon as new and free upgrades are available. Enjoy your WAS7000!
1. General information 1.4 Environmental information 1.5 Maintenance All redundant packaging material has been Cleaning the Set omitted.We have done our utmost to ● Use a soft cloth slightly moistened with a make the packaging easily separable into mild detergent solution. Do not use any three mono materials: cardboard (box), solutions that contain alcohol, spirits, polystyrene foam (buffer) and polyethylene...
1. General information 1.6 Safety information ● Place the set on a flat, firm and stable surface. ● Keep the system, batteries or discs away from excessive moisture, rain, sand or any heat sources, such as heating equipment or direct sunlight.
2. Controls 2.1 Controls on the Station MUSIC FOLLOWS ME (Top and front panels) – HD: moves music playback between Center and Station or between Station and Station MUSIC BROADCAST STANDBY-ON/ ECO POWER – HD: broadcasts music from the Center to the –...
2. Controls CD/MP3-CD 2.3 Icons on LCD display (works with WAC7000 Center only) HARDDISK (HD) Icon Description – selects HD (hard disk) source – In standby mode: switches the set on and Client connected selects HD source Client not connected SOURCE –...
Center and Station. Up to 5 or on wall without stand. WAS7000 stations can be connected to a WAC7000 Center. The first time you set up a Wi-Fi connection, place the Center and Station side by side on a flat and firm surface.
3. Installation For the devices with USB cable: 3.3 Rear connections ● Insert one plug of the USB cable (not supplied) Warning: to the socket on the Station – Never make or change the connections ● Insert the other end of the USB cable into the when the mains is switched on.
3. Installation 3.3.3 Connecting to other additional 3.4 Using AC power devices Make sure that all connections have been made It is possible to play audio output from an before switching on the power supply external source, e.g.TV,VCR, Laser Disc player, DVD player on the Station.
4. Preparation Helpful hints: 4.1 Setting clock To change to 12-hour or 24-hour format The time can be displayed in 24-hour or 12-hour – In the Time menu, select Time Format (see the format. above Step 2) – Press 3 or 4 and 2 to select your option. Press MENU to enter the menu screen.
Press 3 / 4 to highlight an option. operate the other wireless music systems Enter its submenu by pressing 2 from Philips (e.g.WACS700,WACS5) Press 1 to return to the previous option list – Always point the remote control directly Press OK or 2 to confirm towards the IR sensor on the Station you wish to operate.
5. Basic functions 5.1 Switching to standby/on and 5.2 Switching to power-saving selecting functions mode In power-saving mode, the set’s display and Wi-Fi When the set is switched on, press STANDBY- connection are turned off ON/ ECO POWER to switch it to standby mode (or press on the remote control) When the set is on, press and hold STANDBY-...
5. Basic functions 5.3 Auto-standby 5.6 Sound control When the set has reached the end of playback 5.6.1 Equalizer and remains in the stop position for more than Equalizer enables you to select predefined sound 20 minutes, the set will switch to standby mode settings.
5. Basic functions 5.6.3 Incredible surround 5.8 Selecting languages ● Press MENU to enter the menu screen Press INCR. SURR. once or more times to toggle the surround sound effect on or off Use the navigation controls 3 or 4 and 2 ➜...
6.HD(Located on Center) ➜ The playback screen appears: 6.1 Playing Hard Disk (HD) on the top: HD in the middle: current track name and some Music is centrally stored in the 80GB hard disk track information on the WAC7000 Center. All the stored music at the bottom: elapsed playing time and total can be streamed and played on the Station via playing time...
6.HD(Located on Center) 6.2 Selecting and searching 6.2.1 Selecting a different option If necessary, press 1 repeatedly to enter previous option lists Press the navigation controls 3 or 4 repeatedly and 2 to select the option Press VIEW to return to the playback screen, if necessary Use the alphanumeric keys to input the key MARK/UNMARK...
6.HD(Located on Center) 6.2.3 Selecting tracks of a particular 6.3 Different play modes: REPEAT, SHUFFLE artist During playback, press SAME ARTIST – plays the current track continuously ➜ Playback of tracks by the current artist – repeats all the tracks (under current continues after current track.
6.HD(Located on Center) On the source unit (Center or Station) 6.5 Viewing track information where music is playing: Press VIEW on the remote control once or In HD source, select and play the album or more times to enter the playback screen. playlist you wish to play on the destination unit (see 6.2 : Selecting and searching) MENU...
6.HD(Located on Center) To stop MUSIC BROADCAST, press STOPÇ on the Center Helpful hints: – To exit MUSIC BROADCAST on a Station, press STOP Ç on the Station.To broadcast music to the Station again, press STOP Ç on the Center, and then activate MUSIC BROADCAST on the Center again.
7. FM radio 7.1 Tuning to radio stations 7.2 Storing preset radio stations You can store up to 60 preset radio stations in Connect the supplied FM wire antenna to the the memory. Station (see 3. Installation) Check that the set is switched on or in standby 7.2.1 Autostore: automatic programming mode (see 5.
7.4 NEWS Keypad (0-9) to select your desired preset You can activate NEWS while listening to HD, number. USB, UPnP, or AUX source on WAS7000.The set Press OK will tune to the news radio station if the related ➜ Current radio station is stored to that preset signals are received from a RDS station.
8. External sources 8.1 Playing USB mass storage How to transfer music files from your PC device to a USB mass storage device You can easily transfer your favorite music from You can playback music from a USB mass storage your PC to a USB mass storage device just by device on the Station.
) To adjust the sound and volume, use the sound Press SOURCE once or more times to select controls on your external device or on WAS7000. ➜ The icon appears – No USB Device Present appears if the USB device is not supported by the Station –...
Station, check that the UPnP server software ➜ is properly installed and enabled on the device Server not found appears if there is no UPnP (e.g. Philips Media Manager in the by-packed PC device found in the network Suite CD, Musicmatch ,Window Media ®...
10. Sleep 10.1 SLEEP You can preset a certain period of time after which the Station will switch to standby mode.. On the remote control, press SLEEP repeatedly to select the desired time period (in minutes): ➜ The display shows in sequence: Sleep 15, 30, 45, 60, 90, 120, Off.
11.Alarm 11.1.2 Setting repeat mode 11.1 Setting alarm To set repeat mode for the alarm sound. IMPORTANT! a. In the alarm setting menu, press 3 or 4 and 2 to select Repeat. Before setting the alarm, check that the clock setting is correct. 11.1.1 Setting alarm time Enter the alarm setting menu Press MENU...
12. Network setting On the Center 12.1 Adding Additional Station to Press STOPÇ when all the Stations are found. the Wi-Fi network on the Center Up to 5 Stations can be connected to the 12.1.1 Deleting a Station WAC7000 Center.When adding a Station to the Center’s Wi-Fi network, you can play the Center’s Center’s music library on the Station or move music...
12. Network setting Select Automatic. 12.2 Connecting to external Wi- Fi network Helpful hint: You can also select Static and assign an IP address The external Wi-Fi network can be a single PC as prompted using the alphanumeric keys. or a PC network As prompted, select Yes to apply the settings For music playback within the external network, ➜...
12. Network setting As prompted, select Yes to apply the settings 12.3 Connecting to external ➜ On the display, the icon is changed to wired network As prompted, select Yes to apply the settings The external wired network can be a single PC, a ➜...
12. Network setting 12.4 Viewing the connection with external network Check that the Station is in HD source Select Information on the Station a. Press MENU to enter the menu screen b. Press the navigation controls 3 or 4 and 2 to enter Information menu.
13. Reset 13.1 Reset If desired, you can restore the Station to their default settings (including the network settings). When to reset the Station: – Resetting the Station helps to re-establish the Wi-Fi connection between the Center and Station. – Change the way the Station connects to an external Wi-Fi/wired network.
14. Firmware Upgrade Wait until "wait for firmware" shows on the 14.1 Firmware upgrade WAS7000 display You can upgrade your WAS7000 Station with the Click Refresh icon.The PC shows as below: supplied PC Installer CD Wireless Audio Device Manager (WADM).
If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to resolve a problem by following these hints, consult your dealer or Philips for help. Problem Solution ✔...
Page 42
Some files on the USB device are not displayed number of titles exceeds 999. ✔ Only completely recorded MP3/WMA files can be found and played by WAS7000. Check if the file has been completely recorded. ✔ DRM-protected WMA files cannot be played on WAS7000.
16.Appendix 16.1.3 Mounting your Station 16.1 How to mount your Station onto wall Align the bracket in the chosen location on a wall. Use a pencil to mark the drilling positions. IMPORTANT! – The wall mounting instructions are for the use of the qualified wall mounting person only! –...
Meet Philips at the Internet http://www.philips.com Need help? Online Go to www.philips.com/support WAS 7000 CLASS 1 LASER PRODUCT 3141 075 21741 C Royal Philips Electronics N.V. 2006 Printed in China PDCC-2006...