Skip Perforation - Panasonic EASA-PHONE KX-T61610 Installation Manual
Electronic modular switching system
Hide thumbs
Also See for EASA-PHONE KX-T61610:
- Programmable executive override (4 pages) ,
- Operating instructions manual (52 pages) ,
- User manual (6 pages)
Table of Contents
Advertisement
The skip perforation
code indicates the number
of lines to be skipped.
When the print head
reaches the line designated,
the print
head
moves to the top position
of
the next page.
0 (print head does not skip.)
1 (print head skips the last line.)
2 (print head skips the last 2 lines.)
9; (print head skips the last 95 lines.)
Programming
I. Dial (27).
"SMDR
PARAMETERS"
will be dis-
played.
2. Press the NEXT
button.
"NL-CODE:
CR-l-LF"
will be displayed
and "CR+LF"
will blink.
3. Press the SELECT
button
to alternate
between
CR-?-LF and CR to select the
desired mode.
4. Press the MEMORY
button.
The LCD will stop blinking.
5. Press the NEXT
button.
"BAUD
RATE:
1200B" will be displayed
and the "1200B"
will blink.
6.
Repeat pressing the SELECT
button until
the desired baud rate is displayed.
7. Press the MEMORY
button.
The LCD will stop blinking.
8.
Press the NEXT
button.
"WORD
LENGT:
7BITS"
will be dis-
played and the "7BIT.S"
will blink.
9.
Press the SELECT
button
to alternate
between 7BITS and 8BITS to select the
-desired mode.
10.
Press the MEMORY
button.
The LCD
will stop blinking.
11.
Press the NEXT
button.
"PARITY:
MARK"
will be displayed and
the "MARK"
will blink.
12. Repeat pressing the SELECT
button until
the desired parity code is displayed.
13. Press
the
MEMORY
button.
The LCD
will stop blinking.
14.
Press the NEXT
button.
"STOP BIT: IBIT"
will be displayed and
the "IBIT'
will blink.
15. Press the SELECT
button
to alternate
between 1BIT
and ZBITS
to select the
desired mode.
16.
Press the MEMORY
button.
The LCD will stop blinking.
17. Press the NEXT
button.
"PAGE
LENGTH:
66" will be displayed
and the "66"
will blink.
18.
Dial (4 through
99) for the page length
entry.
19. Press the MEMORY
button.
The LCD
will stop blinking.
20. Press the NEXT
button.
"SKIP
PERF:
0" will be displayed and
the "0" will blink.
21. Dial (0 through
95) for the skip perfora-
tion code entry.
22. Press the MEMORY
button.
The LCD will stop blinking.
23.
To return to the initial program mode, press
the END button.
Programming Table
See page 6-18.
Conditions
_'
~To return to the previous
mode, press the
PREV button instead of the NEXT
button.
Hide quick links:
Advertisement
Table of Contents
